HydroThermal Liquefaction (HTL) has proven itself as the most resource-, energy- and cost efficient technology pathway for conversion to liquid fuels of a wide range of sustainable feedstocks
The purpose is to develop a sustainable, operational and commercially viable biofuel to replace currently used fossil-based fuels in the maritime sector. Developments are based on patented.
The aim of the project is to develop ensiling as a method for pretreatment of straw which allows use in biogas plants and ensures a higher biogas yield. Wet or moist straw is treated with ’ensiling
The aim of the PlateCell project is to develop and demonstrate roll-2-roll electrodeposition of thin film photovoltaics based on the earth-abundant and non-toxic, CZTS, semiconductor with at least 8%
Biowaste2Gas’ laboratory scale model is upscaled to a pilot plant. Following the initial testing, the plant is moved to demo-site for lifetime testing. In parallel, AU documents the potential in
InjectMe develops a biological Power-to-Methane technology that uses electricity and CO2 from biogas to produce biomethane (electrofuel). The aim of InjectMe is to develop a cost-efficient system for
Demonstrating that the effect of using pre-treated low valuable biomasses is an improved capacity of any given biogas plant by demonstrating that the pre-treatment provides the same amount of
The project will be the Danish part of the recently started IEA (International Energy Agency) SHC (Solar Heating & Cooling Programme) Task 64 on Solar Process Heat. The key components of solar heating
The purpose of this project is to perform a feasability study on the potential of establishing a full scale demonstration plant that can support a circular energy production on Samsø and help make it
The project is motivated by a need for de-risking of central process steps related to a new application of Hydrofaction for conversion of high ash containing urban waste streams to green
The objective of the PV-Rock-Roof project is to develop a cost-effective, aestetical and energy saving roof-cover where a new type of photovolatic (PV) module is glued to the insulation without need
The purpose of developing a small scale version of the Ecodrying Bio-refining plant is to ease the handling of horse manure for individual properties keeping horses and to turn their horse manure into