The aim of the project is to develop an energy-efficient biomass boiler for straw combustion. The boiler must have a high efficiency and low NOx emissions. The goal is to reduce NOx emissions without
The objective of the project is to develop a special wheeled mixer vessel designed for pretreatment of straw and deep litter before utilization in an agricultural biogas plant.
The aim of the project is to provide the best possible technological solution for the production of garden park chips with acceptable technical specifications and at the same time pave the way for a
The objective of the project is to develop a combined hardware and software solution that can efficiently act as a tool for doing fast and accurate drone-based luminescence inspection of solar plants
During production of biogas different malodorous compounds are formed, e.g. hydrogen sulfide (H2S) that, without proper waste air treatment, can be a major nuisance towards neighbors to the biogas
The objective of the project is further development and documentation of the online measurement system into an operational tool for real time monitoring and optimization of the biogas process in
To take a critical lead forward towards a cost effective and sustainable pipeline between the unutilized global bimass resources on one side and the demand for "green" fuel products on the other side
The BE-Clean project will demonstrate a new cleaning process. The process will remove unwanted
sulfur from biogas. The new process is cheaper than currently available technologies and uses
electricity
The objective of BIO-ReFuel is to design, produce and test a small biogas to methanol modular
demonstration plant that can produce 426 liters of methanol from approx. 240 m3 of biogas per
day.
The purpose of the project is to; develop, build and test a filter system that can process product gas from a gasification process so that this gas is prepared for subsequent use. In addition to this
The aim of the project is to reduce the average energy price for utility scale photovoltaic systems by increasing the harvested solar energy by using bifacial solar modules, reflectors, trackers and
The objective of the project is to ensure that Danish research institutions and companies active in the development, installation and operation of PV systems, are informed on the technical and
The purpose of the Straw2Gas project in full is to demonstrate the use of straw fibres from the JENA straw treatment plant for the production of biogas, and thereby open for a commercial and technical
The overall purpose of the project is to increase the market for plastic solar cells by ensuring entrance of larger panels and systems through scalable electronics.
To develop more effective, safe and durable lenses for concentrated solar power. Efficiency and durability will be improved by using better materials than the current thermoplastics, and safety and to