The purpose of this project is to perform a feasability study on the potential of establishing a full scale demonstration plant that can support a circular energy production on Samsø and help make it
The project is motivated by a need for de-risking of central process steps related to a new application of Hydrofaction for conversion of high ash containing urban waste streams to green
The purpose of developing a small scale version of the Ecodrying Bio-refining plant is to ease the handling of horse manure for individual properties keeping horses and to turn their horse manure into
The aim of the project is to develop an energy-efficient biomass boiler for straw combustion. The boiler must have a high efficiency and low NOx emissions. The goal is to reduce NOx emissions without
The objective of the project is to develop a special wheeled mixer vessel designed for pretreatment of straw and deep litter before utilization in an agricultural biogas plant.
The aim of the project is to provide the best possible technological solution for the production of garden park chips with acceptable technical specifications and at the same time pave the way for a
During production of biogas different malodorous compounds are formed, e.g. hydrogen sulfide (H2S) that, without proper waste air treatment, can be a major nuisance towards neighbors to the biogas
The objective of the project is further development and documentation of the online measurement system into an operational tool for real time monitoring and optimization of the biogas process in
To take a critical lead forward towards a cost effective and sustainable pipeline between the unutilized global bimass resources on one side and the demand for "green" fuel products on the other side
The BE-Clean project will demonstrate a new cleaning process. The process will remove unwanted
sulfur from biogas. The new process is cheaper than currently available technologies and uses
electricity
The objective of BIO-ReFuel is to design, produce and test a small biogas to methanol modular
demonstration plant that can produce 426 liters of methanol from approx. 240 m3 of biogas per
day.
It is the goal to increase the fundament for optimising pellet production and give relations between the quality of the pellet and the conditions during the production.
The aim of the MaxiFuels project is the pilot-scale testing and further developemnt of the 2nd generation concept for bioethanol production from lignocellulosic biomass with the production of biogas
The purpose of this project was to show that condensing flue gasses after filtration in a bag filter is an economical and environmental friendly solution for straw fired heating plants.
The opbejctive of the project has been to improve design and process stability in biogas plants. The results can be divided within the following main categories: 1) Pre-treatment, serial coupling of
Co-digestion of manure with fatty waste may improve biogas production and thus the economy of manure-based biogas plants. However, fat is potentially inhibiting for the biogas process, and biogas
The objective of the project was to study new deNOx catalysts with improved alkali resistance in relation to flue gas from biomass-fired facilities. Alkali resistance of three types of catalysts is so