Efforts to change road transport is focused on electrifying the transport sector. The main disadvantages of this strategy are that it requires replacing the existing vehicle fleet and an entirely new
The main purpose of this project is to develop and demonstrate an optimized heating plant that will have much higher efficiency and much less CO2 emissions than the heating plants that are built today
HydroThermal Liquefaction (HTL) has proven itself as the most resource-, energy- and cost efficient technology pathway for conversion to liquid fuels of a wide range of sustainable feedstocks
The purpose is to develop a sustainable, operational and commercially viable biofuel to replace currently used fossil-based fuels in the maritime sector. Developments are based on patented.
The aim of the project is to develop ensiling as a method for pretreatment of straw which allows use in biogas plants and ensures a higher biogas yield. Wet or moist straw is treated with ’ensiling
Biowaste2Gas’ laboratory scale model is upscaled to a pilot plant. Following the initial testing, the plant is moved to demo-site for lifetime testing. In parallel, AU documents the potential in
InjectMe develops a biological Power-to-Methane technology that uses electricity and CO2 from biogas to produce biomethane (electrofuel). The aim of InjectMe is to develop a cost-efficient system for
Demonstrating that the effect of using pre-treated low valuable biomasses is an improved capacity of any given biogas plant by demonstrating that the pre-treatment provides the same amount of
The project designs and erects a demonstration plant with an annual output capacity of 5 million litres of bioethanol that can be followed at www.biogasol.com. The plant must under semi-industrial
The RETROGAS project aims at demonstrating viable production of biogas solely based on animal manure and methods of achieving balance of plant nutrients from animal slurry and manure at farm level
The project has to assure a better and more rewarding communication between researchers and practicians, light up the projects will become a good business , follow up ongoing projects and promote a
Dansk Biotek - Foreningen af Bioteknologiske Industrier i Danmark
EUDP
2008
2014
The Danish Government has launched the first collective Danish Action Plan for Eco-efficient Technology. The Action Plan will help ensuring that Denmark and Danish enterprises continues to be in the
Danish Technological Institute is the leader of one work package in this international project. Raw material which today is only partially or completely unexploited with respect to a biofuel resource
Stirling DK has designed and built a containerized combined heat and power plant with one Stirling engine and an up-draft gasifier fuelled by wood chips. The plant is fitted into three 20” standard
The project ''IEA Bioenergy - Task 37, Energy from biogas and landfill gas'' is in fact an international partnership of knowledge transfer and research exchange, aiming to carry out expert technical
A demonstration facility has been erected at Kalundborg for production of 2G bioethanol based on straw. The facility was erected at the Asnæs plant in Kalundborg. The facility can produce 5.4 mill