The objective is to investigate and evaluate the function of an office building with extremely low energy consumption for heating. The target is 15 kWh/m2/yer, which is a reduction of 70% compared to
The purpose of this project was to reveal the possibilities of transport of hydrogen via the existing Danish natural gas grid. The investigation only covers the distribution grid. For this purpose, a
The goal of the project was to construct and test a 10 kW CHP (5 kWe) PEM FC generator aimed for single-family households in Denmark. Two generators, each 'half size' of the project generator goal
The PEM fuel cell car will function as a laboratory where components and modules in the future can be upgraded with improved version. Danish industry gets in this way an opportunity to develop and
The project will demonstrate the concept of application of reversible fuel cells integrated into a building, with generation of hydrogen from excess electricity from nearby renewable energy systems
Based on the results from the project's Part l, the purpose of project tasks described in this report was to reconfigure / update the vehicle for dynamical operation with a Danish-produced PEM fuel
The aim of the project has been to single out energy solutions that have a significant energy and environmental influence as well as an acceptable economy in connection with renovation and urban
This pre-project contributes to the development of future systems for room heating and production/distribution of domestic hot water. Focus is on systems having the lowest possible environmental
Residential energy consumption varies both with the building and its inhabitants. Previous research projects have either focused on technical or on social explanations for variations in energy
There is a great need for the development of new building envelope constructions with more insulation and less thermal bridges to comply with the expected new increased demands. This development work
This project is phase 3 of the Danish contribution to the international project IEA-ECBCS Annex 35: HybVent - Control Strategies for Hybrid Ventilation in New and Retrofitted Office Buildings.
The project is a part of IEA SH&C Task 23 'Optimization of Solar Energy Use in Large Buildings'. The objective is to ensure the most appropriate use of solar energy in building projects, to optimise
The overall goal of this project has been to provide the knowledge and the understanding that can lead to an increased efficiency for ac/dc power systems complying with EN61000-3-2 in wide input range
The aim of this preliminary project has been to develop a 'self-learning' district heating meter using a neural network to control consumer heating installations. Two different neural network
The activities were: Development of improved components, analysis of durability, contacting, improving the methods, materials development, studies of mechanisms and of defect and structural chemistry
The objectives of this research project are to reduce energy consumption of electrostatic precipitators and to improve precipitation efficiency, particularly for small dust particles.