Dynamic and distributed ammonia plants can create new markets and demand whilst bolstering demand for existing products including turbines, ammonia plants and subsequently creating jobs for the Danish
The objective of BLATIGUE-2 is to develop fast and efficient fatigue testing methods for large wind turbine blades, to develop smart equipment to excite the blades under such tests and to increase
The purpose of the project is to increase the liability of blades in operation by installing RTZ Solution. Further, the purpose is to reach higher cost efficiency and higher AEP for the wind turbine
Fatigue of fiber rope is crane applications is not well established, why extensive full-scale testing is currently required for using fiber ropes in crane applications. The main objective of this
LERCat enables leading edge roughness (LER) repairs of wind turbine blades at the right time, yielding a 1 bn DKK/year gain across the partners’ turbine fleets. This is achieved by establishing an
The project involves the development and maturement of a drone charging station and a drone system. The combined system should then be capable of conducting autonomous wind turbine inspections and
Managing offshore corrosion is a subject that is heavily regulated and combined with several industry standards that must be followed to ensure the structure integrity of the assets. Yet, whilst, and
The objective of the BlueDolphin project is to develop and demonstrate a scalable high-temperature proton-exchange membrane fuel cell range-extender platform for smaller electric marine vessels such
The project develops and demonstrates a new sensor solution for process monitoring of hydrogen in applications such as electrolysis plants. The benefits of this new sensor type include long-term
The purpose of IDEA is to establish reference site conditions and wind reference wind farm designs for floating wind turbines. The project follows the international IEA project on wind farm design and
The overall objective of this project is to further adapt, improve and expand the existing operational tracking technology that Claviate has developed to cover the entire onshore wind turbine
We aim to demonstrate that a radically new blade technology combining jointed modular blades with advanced tips made with additive manufacturing can enable increased rotor sizes by up to 20% and lead
The annex will give the participants an overview of the technical and environmental assessment challenges encountered in offshore applications and help them to understand the areas of further R and D
The DK-SOFC b line is targeted towards: 1) decrease of the operation temperature without increasing the area specific resistance, 2) increase of the ro-bustness of the cell, 3) better understanding of
The goal of the project was to develop and demonstrate a 3 kWe DMFC generator aimed for Uninterruptible Power Supply. How-ever, a detailed concept evaluation based on the present Danish DMFC stack and
The goal of the project is to develop and test small (2 kW) reformers for converting natural gas into hydrogen for use in Proton Exchange Membrane (PEM) fuel cell cogen units for single-family houses
The project included the second phase of a process aimed at establishing a platform for wind turbine simulation as a prerequisite for advanced electrical design and optimisation.
The aim of the project is to develop, verify and implement a detailed physical model for the wind field in a wind farm. The model will allow for detailed aeroelastic simulation of wind turbines sited