The project includes two annual meetings of the working group, where information and ideas are exchanged. BPSE will share the information form the work in IEA-Task 39 in relevant meeting in maritime
The aim of the project is to participate in IEA Hydrogen TCP, in order to stimulate hydrogen R&D activities in Denmark and to co-ordinate Danish and international scientific work on hydrogen and
HyTon is to develop the world’s largest hydrogen compressor, capable of dispensing renewable hydrogen for zero emission cars, busses and trucks at large scale. The increased capacity is to enable
The eFuel project represents a new and better way of producing electro-fuels, building on a well-known technological basis. The project will develop and build a large-scale prototype bio-trickling
COBRA Drive has the purpose to advance the Reformed Methanol Fuel cell technology to a level where it can replace diesel engines in Light Commercial Vehicles.
Demonstration of a SOEC-based ammonia synthesis gas production without an air separation unit and use of ammonia in SOFC in parallel with techno-economic studies.
The purpose of the Power2Met project is to develop, design and build a pilot plant for a complete, standardised and modular power-to-methanol plant that can be offered to upgrading biogas plants
The purpose of this project was to reveal the possibilities of transport of hydrogen via the existing Danish natural gas grid. The investigation only covers the distribution grid. For this purpose, a
The goal of the project was to construct and test a 10 kW CHP (5 kWe) PEM FC generator aimed for single-family households in Denmark. Two generators, each 'half size' of the project generator goal
The PEM fuel cell car will function as a laboratory where components and modules in the future can be upgraded with improved version. Danish industry gets in this way an opportunity to develop and
The project will demonstrate the concept of application of reversible fuel cells integrated into a building, with generation of hydrogen from excess electricity from nearby renewable energy systems
Based on the results from the project's Part l, the purpose of project tasks described in this report was to reconfigure / update the vehicle for dynamical operation with a Danish-produced PEM fuel
The activities were: Development of improved components, analysis of durability, contacting, improving the methods, materials development, studies of mechanisms and of defect and structural chemistry
In the autumn of 1999 the IC plant at Nordborg Power Plant was commissioned, and following that the emissions and emission reductions of the plant were measured.