In the BIPV Quality Cities project the total amount of PV systems with special focus on BIPV Quality, Solar Watch online monitoring and a combined focus electricity savings will amount to 3.850 kWp.
The main purpose of the planned Phase III (PVIB-III) is establishment of 1,5 – 2 MW of additional capacity primarily in terms of a large utility scale PV power plant of at least 1,5 MW. Thus very
Weptos A/S receives the award "Årets bedste ForskEL projekt 2012" for best energy research project awarded by Energinet.DK. The award was given to Weptos A/S for an excellent and professionally
The purpose of this project is to demonstrate and optimize the design of a 5 kW grid connected wave energy LOPF (Lever Operated Pivoting Float) buoy, through a design study and subsequent test in the
Pre-study to design and demonstrate, in small scale, cost effective solutions for 3 commonly identified challenges in the wave power industry, which typically involves floating devices. High efficient
This project focuses on the integration of photovoltaics (PVs) with thermoelectric generators (TEGs) and microchannel heat exchangers (µHX) in two parallel phases: low-thickness solar power systems
The purpose of the project was to carry out activities on the behalf of the Danish Energy Agency in two international EV networks (IA-HEV and EVI-CEM). Project activities included preparation of and
The purpose of the project is to work embodied energy and carbon dioxide emissions for building construction together with several international collaborators within IEA. The purpose is to gather
Hot flue gases from brickwork kilns carry the potential for utilizing recovered heat for the heating of kilns, dryers or district heating system to substitute fossil fuels. The project aim to develop
The goal of the project is to develop and demonstrate energy efficient control of LED backlight for TV displays. The novel approach is based on energy aware optimization. It will be demonstrated for
The project is aimed at developing the concept for refilling of ammonia containers for the reduction of pollution from diesel vehicles, completing an ammonia dosing device which is suitable for use on
The electricity tax has been reduced with for electricity used heat pumps. These initiatives are expected to increase the market for large heat. Ground water and how to integrate in the heat
The objective for Partnership for Wavepower Roadmaps are to consolidate and combine the Danish Wave Developers common efforts and produce plans to achieve common goals for Anchor systems, Power
The project will develop a generation B version that
- It is not based on the use of liquid nitrogen but the electric refrigeration
- Ensures that moisture / frost does not create problems for the
Development of a unique software solution for return temperature optimization (RTO) in DH systems, using BigData from smart meters and real-time models connected to SCADA. Development will take place
The aim is to finish, test and spread the knowledge about new possibilities for environmental savings by using HB-Gas Quality sensor combined with different Control Systems. The sensor offers improved
The objective is to demonstrate “intelligent” UV light emitting diodes (LED) luminaires for energy saving curing processes in the furniture manufacturing industry.
The objective is to demonstrate an improvement in the energy efficiency of heat pumps with up to 50 % bt using a novel technology where heat pumps are operated together with an optimal usage of
Electric energy can be reclaimed from the engines and exhausts of heavy automotive applications. Thermoelectric generators improves the traditional drivetrain efficiency for a reduction of fuel