The project relates to participation in international corporation in an annex related to lEA (International Energy Agency) on stationary distributed generation of electricity in small power units. In
This project is the first phase in the development of an advanced test facility which will enable the wind power industry to develop and test new grid connection solutions, and validate the grid
On basis of the successful work within the EUDP project ''The Albertslund Concept'' a follow-up EUDP project will be realised, focusing on the further development of the ''Solar Prism'' prototype
The project aims to develop and demonstrate concrete solutions for energy rehabilitation of the building envelope, installations and supplies, taking particular account of the architectural and
Only large-scale projects with holistic approaches lead to sizeable results. The strategies suggested by Annex 51 reports can be grouped into three fundamental fields: reduction of final energy
The objective of the project has been to develop and commercialize nacelle-LIDAR technology for power performance verifications such that the expensive and often difficult use of met masts offshore
The project is an international IEA - cooperation project. The project will embrace a problem which is often overseen when it comes to reduction of the energy need in buildings – and that is the end
This project develop new comfort ventilation solutions for buildings with a reduced use of energy. The user will experience better comfort and reduced costs for electricity and heating.
The project's aim was to develop system solutions to extensive additional insulation and air tightening of the building envelope in the renovation of existing buildings and to develop methods for the
The project dealt with: optimal use of vortex generators, VGs, that are presently used on most wind turbine blades. Their main effect is to delay separation in the inner part of the blades where for
The projecthas developed a methodto measurenoisefromairfoilsinan industrialwind tunnel,which willhelp to increase theDanishwind turbinecompetitiveness.The methodisthe key tonew
The objectives of the project is to break down the barriers for energy renovation of private owned houses in Denmark by: assisting in further development of 4 key energy technologies, exploiting their
It is theoretically possible to achieve a reduction of 19% of the total agriculture's energy consumption by reducing the energy consumption for heating and for electric motors according to reduction
It is a concern in wind energy that wind turbines do not yaw efficiently into the wind due to draw backs of nacelle anemometry. The loss of power is estimated to be 1-3% in flat terrain and offshore
The main goal of the project was to develop, demonstrate and implement new tools, models and components in the design process for aeroelastic optimization of Mega-Watt wind turbines with the scope of
The purpose of the project is to develop technologies, which can optimize the thermal storage of concrete constructions. The concrete is being tested in full scale in EnergyFlexHouse at the institute
The project has used tools for process simulation to improve understanding of wind turbine blades. Based on the measurements, the project participants designed a new wing, followed by a demonstration