The aim of the UnitSun project is to develop the worlds most advanced prefabricated PV integrated façade system utilizing all the benefits of the prefabrication approach to the construction market for
The objective of BLATIGUE-2 is to develop fast and efficient fatigue testing methods for large wind turbine blades, to develop smart equipment to excite the blades under such tests and to increase
The purpose of the project is to increase the liability of blades in operation by installing RTZ Solution. Further, the purpose is to reach higher cost efficiency and higher AEP for the wind turbine
Fatigue of fiber rope is crane applications is not well established, why extensive full-scale testing is currently required for using fiber ropes in crane applications. The main objective of this
LERCat enables leading edge roughness (LER) repairs of wind turbine blades at the right time, yielding a 1 bn DKK/year gain across the partners’ turbine fleets. This is achieved by establishing an
The project involves the development and maturement of a drone charging station and a drone system. The combined system should then be capable of conducting autonomous wind turbine inspections and
Managing offshore corrosion is a subject that is heavily regulated and combined with several industry standards that must be followed to ensure the structure integrity of the assets. Yet, whilst, and
New PV module and inverter technology replace old well-known solutions potentially introducing new failure modes. To mitigate such risk factors and support continued deployment of utility scale PV
The purpose of IDEA is to establish reference site conditions and wind reference wind farm designs for floating wind turbines. The project follows the international IEA project on wind farm design and
The overall objective of this project is to further adapt, improve and expand the existing operational tracking technology that Claviate has developed to cover the entire onshore wind turbine
We aim to demonstrate that a radically new blade technology combining jointed modular blades with advanced tips made with additive manufacturing can enable increased rotor sizes by up to 20% and lead
Project FSSE aims to develop a concentrated solar capture (CSP) system with storage and a high temperature Organic Rankine Cycle Unit (ORC) that can be utilized on demand to produce carbon neutral
The objective of the project was to build a demo-plant applying a new d.c. technology and to test in an onshore location with the purpose to investigate technical and financial possibilities for a d.c
This project involves experimental verification of three Risø-A airfoils to evaluate their application on Danish wind turbines. The Risø-A airfoils were designed for both stall and pitch regulation by
The project has developed a new Mini Power Plant technology for photovoltaic applications in developing countries with no grid electricity supply. The project has developed, constructed and tested
The project is the first step in a research effort with the overall objective to prepare technical guidelines for grid connection of wind farms to weak grid, and to identify and develop technical
This Annex had as the main objective to set up an aerodynamic data base with experimental results from detailed rotor measurements. The participants in Annex XIV were the five different research