SOLBY2006 Solar energy in the energy frame – phase 2. The purpose of phase 2 was to implement a number of development and demonstration projects of solar thermal and photovoltaics for low energy
Based on the development projects under the Photovoltaics & Architecture main project, a catalogue has been published of current photovoltaic integration in Danish buildings.
The objectives of this project is to improve on the current practice of basing performance evaluation on a single point measurement of wind speed and instead introduce a method where the wind field
This project has investigated noise emissions from large-scale wind turbines in relation to small-scale wind turbines. In addition, noise nuisance at low frequencies was investigated, noise
The aim of the project is to develop a simulation platform for generation of relevant wind fields applicable for aeroelastic design simulations. This is achieved by development, verification, and
A calculation tool was developed for use of solar energy in renovation and new construction projects - BYG-SOL – for professional clients, local authorities, architects and consultants. The tool may
The annex will give the participants an overview of the technical and environmental assessment challenges encountered in offshore applications and help them to understand the areas of further R and D
The focus on the Danish part of the IEA project SHC Task 32 Advanced Storage Concepts for Solar and Low Energy Buildings was on Subtask C: Storage Concepts Based on Phase Change Materials and on
The overall goal with the participation in IEA PVPS is to maintain and build upon the knowledge transfer to Denmark via the participation in the IEA PVPS work. By the participation a network is
The purpose of the project has been to examine the possibilities for PV in an industrialised building process. The project is an information gathering and development project with basis in knowledge
The project proved that PowerShade with an efficiency ratio in excess of 5% can be produced, and that future development will probably further increase its efficiency. The project also showed that the
The concept of combining solar power, absorption cooling and natural gas-fired small-scale CHP in Strandby met expectations and could be replicated in other CHP plants. However, it is important to
The project developed new edge sealing for the DSC cell. Made from inert polymer, the sealing is mounted as laminate in controlled conditions. Laboratory experiments and cell exposure to accelerating
This project changed towards possible commercialisation. Consequently, project cooperation was terminated and part of the work transferred to project 6389 ‘Technical silicon for high-efficiency PV
The wind farm output of an offshore-farm such as Horns Rev changes between nearly constant output to highly variable power output. A balance responsible would benefit from knowing the variability of a
The object of the project was to determine the wave impact on wind turbines and test ways to reduce such impacts. The project showed that all major wave loads are caused by breaking waves and that
A report was completed in summer 2007. The report was successfully presented at the PREHEAT seminar, which took place at the Intersolar exhibition in Freiburg, June 21-22 2007. A PowerPoint