The focus of this effort is the reduction of uncertainties in offshore wind turbine design, by complete measurement of the effects of interactions of a modern turbine structure (located on the Walney
The objective of the Light Rotor project is to develop the basis for design of wind turbine blades for use on the order of 10MW rotors with lower weight, tailored aeroelastic response and optimized
The purpose is to develop and validate computer codes related to response simulation on offshore wind turbines and their substructures. It is carried out within the framework of lEA Annex 30
We will develop a complete residential PV system for grid connection, all in one 230 V AC, 50 Hz, 270-350 W module, with substantial testing to realize a system with the required performance of more
Megavind continues to support and consolidate the stronghold of the Danish wind industry through a focused and strategic vector apporach to validation, demonstration, research and education. Megavid
The objective of this project was to initiate a new IEA-SHC task for large scale solar heating systems. The aim of the task is to exchange experiences concerning large scale solar heating systems and
Danish lead in new IEA-SHC task for large solar heating systems. - Optimise large scale solar heating systems - focus on design and operation of combined systems including heat pumps and seasonal
The project shall demonstrate a heat pump seasonal storage connected to the upcoming 35.000 m2 solar plant in relation to Donninglund Fjernvarme. EUDP has in 2009 granted 12. mio. kr. to the project
The overall objective of the project is to develop a prototype trailing edge flap system for a wind turbine blade. From its present stage of proven functionality under laboratory conditions it is
The objective of this project is to model and explore the influence of atmospheric stability conditions on structural loading and production losses of wind turbines operating in wind farm conditions
The purpose of the project is to introduce and implement a new dynamic data analysis method, DDA, in the Danish wind industry. This method is based on fast measured data rather than traditional 10min
The main objective is to enable the Danish participation in a newly started project within the framework of the IEA-SHC programme (solar heating and cooling). The title of the new task is Task 44
The purpose of the project is to strengthen the Danish contribution to the International Energy Agency project 'IEA Annex 30: Offshore Comparison of Dynamic Computer Codes and Models' with an
The project Energy efficient prefab. facade- and roof element has as purpose to design, develop and demonstrate an cost effective building element with integrated photovoltaic through the use of pre
The purpose of the projekct is to duce cost of energy in the design, production, transport, installation and maintenance of monopile foundations for large offshore wind turbines. The primary goal is
Nordisk Folkecenter for Vedvarende Energi
ForskVE
2010
2011
The immediate project purpose is to support an accelerated enlargement of PV plants in Denmark by documentation and demonstration of two household PV plants with intended “lighthouse effect” and to
The purpose of the project is to develop, design and demonstrate a total concept with solar heat, borehole storage and heat pump for electricity regulation and up to 100% reduction of fossil fuels on
The purpose of the project is to improve and validate newly developed models for simulation and prediction of wind power fluctuations, by integrating the tools with meteorological tools for wind
Problem description: The impact of high penetration levels of PV has different dimensions: i) In the distribution network, a high share of PV may require new approaches for voltage control as the
The objective of this project is on basis of simple measurements on 6 turbine towers in the Rødsand 2 wind farm to identify, model and verify the basic mechanisms driving the increased loading