The objective is to ensure future large-scale nacelle test facilities are technical and economically feasible for the wind industry. This will be done by further developing and demonstrating R&D Test
The project partners aim to develop and demonstrate a subsea robot, ACOMAR - Auto COmpact MArine growth Remover, which increases atomization of the marine growth removal process on offshore structures
The project purpose is to deliver easily accessible metocean siting data for design and planning anywhere offshore. Through a scalable quality/cost structure ranging from free general data analytics
The aim of the PlateCell project is to develop and demonstrate roll-2-roll electrodeposition of thin film photovoltaics based on the earth-abundant and non-toxic, CZTS, semiconductor with at least 8%
The project objectives of GOTWind is the optimization of bolt technology for wind turbines from production until end-of-life. Overall, this project will ensure that there are set out general rules in
The project will be the Danish part of the recently started IEA (International Energy Agency) SHC (Solar Heating & Cooling Programme) Task 64 on Solar Process Heat. The key components of solar heating
The overall objective of the project is to explore the potentials of a completely new wind turbine
concept – the Low-Wind turbine, designed for optimal integration in a power system with
considerable
The objective of the PV-Rock-Roof project is to develop a cost-effective, aestetical and energy saving roof-cover where a new type of photovolatic (PV) module is glued to the insulation without need
The MADEBLADES project targets further development and prototype demonstration of a disruptive design and manufacturing solution for large (>90m) offshore wind turbine blades.
The purpose is to develop a new methodology for the assessment of the remaining useful life of wind turbine rotor blades individually, based on their individual damage states. The methodology is
The objective of the project is to develop a combined hardware and software solution that can efficiently act as a tool for doing fast and accurate drone-based luminescence inspection of solar plants
The scope of this project is to develop a crane that can install a complete turbine with a hub height of 250m. The turbine can be installed in less than 2 days and the weight of the crane is less than
The obejctive of ProbWind is to develop and demonstrate the basis for reliability-based/probabilistic design of wind turbines, leading to the development of a new international standard on