The overall objective of the project is to explore the potentials of a completely new wind turbine
concept – the Low-Wind turbine, designed for optimal integration in a power system with
considerable
The MADEBLADES project targets further development and prototype demonstration of a disruptive design and manufacturing solution for large (>90m) offshore wind turbine blades.
The purpose is to develop a new methodology for the assessment of the remaining useful life of wind turbine rotor blades individually, based on their individual damage states. The methodology is
The scope of this project is to develop a crane that can install a complete turbine with a hub height of 250m. The turbine can be installed in less than 2 days and the weight of the crane is less than
The obejctive of ProbWind is to develop and demonstrate the basis for reliability-based/probabilistic design of wind turbines, leading to the development of a new international standard on
The objective of the LICOREIM project is to demonstrate lidar-assisted wind turbine control strategies for robust and reliable improvements on both currently operating (i.e. retro-fit solutions) and
The purpose of this project is to test/demonstrate the proof of concept of the developed lifetime extension concept for offshore wind turbines. It is expected that by using the developed concept it
The project aims at increasing the efficiency of new and operating wind tubines by developing innovative vortex generators, i.e., small devices attached to the surface of blades, improving their
This project focuses on providing solid proof that a) 3D printing can be used to manufacture tall wind turbine towers, b) it can be done economically and technically feasible, c) 2 design concepts for
The technologies in scope aim at increasing the aerodynamic efficiency of wind turbines, reducing turbine load levels, and increasing the authority of control of wind turbines through additional
The business idea of the blade painting machine is to make the blade production cheaper, safer and more flexible. The SEM-BC will be designed to work with all blade types and is relevant for more than
The PossPOW project developed a verified real-time power curve for offshore wind power plants, also applicable under downregulation. Concert will enrich this to a full asset optimisation package
NetVind aims toward the green transition in Denmark, by rethinking the way of using wind power plants in distribution systems. NetVind analyses and demonstrates in a large experimental facility, which
The NSON-DK project is the Danish part of a North Sea Offshore Network (NSON) project umbrella with research participants from UK, Germany, Norway and Netherlands. The purpose is to study the impact
The objective of BLATIGUE is to develop fast and efficient fatigue test methods for large wind turbine blades and to develop equipment to excite the blades under such tests.
Turbines are designed to change its direction as a change in the wind direction occurs, and partial wear occurs when the windmill actively yaws back and forth in a too narrow spectrum for a long time
The aim of this project is to proof the iSpin measurement capability and robustness on a broad scale. The robustness shall be proven based on measurements of a total of around 90 WTGs located in 9
The objective of the project is to develop an offshore self-hoisting crane (OSHC) based on the principles of Liftra Self Hoisting Crane (LSHC). The OSHC must be operable from a floating platform