As a specific Danish contribution during the project period, the Bioenergy Group at the University of Southern Denmark updated the report ‘Source separation of organic fraction of household waste’.
The annex will give the participants an overview of the technical and environmental assessment challenges encountered in offshore applications and help them to understand the areas of further R and D
The focus on the Danish part of the IEA project SHC Task 32 Advanced Storage Concepts for Solar and Low Energy Buildings was on Subtask C: Storage Concepts Based on Phase Change Materials and on
The overall goal with the participation in IEA PVPS is to maintain and build upon the knowledge transfer to Denmark via the participation in the IEA PVPS work. By the participation a network is
Dust will be produced during production and use of wood pellets. The most critical situations will be identified and changes in routines and equipment will be suggested. Both central heat plants and
The aim is to make information about Danish energy research and its results available to users in Denmark and abroad and, through international co-operation, to make international research and its
The purpose of the project has been to examine the possibilities for PV in an industrialised building process. The project is an information gathering and development project with basis in knowledge
Under the Danish-Canadian project, Dantherm Power developed a fully integrated UPS system based on Canadian-based Ballard’s air-cooled LTPEM fuel cells. Eleven UPS units were installed to support
Together with the sector suppliers, the project developed a complete testing basis for assessment of the energy properties of ventilation devices on the basis of recognised Danish and foreign
Based on experience with ESCO projects in a number of local authority areas, NRGi Rådgivning developed and evaluated a phase-divided model for an ESCO partnership aiming to make it easier for the
In 1,452 households with remote-read meters in the Syd Energi supply area, customers received regular feedback on their electricity consumption via SMS or e-mail in a pilot project. The subsequent
The project idea is to use prefabricated thermo-active structures as concrete slabs with embedded plastic pipes (PEX). The active concrete slabs are used both as cooling and heating system, peak load
This project has included a PhD course at Aalborg University (AAU) and the Technical University of Denmark (DTU)/University of Southern Denamrk (SDU) and it has developed two types of converter which
A novel concept for preparation of sulfonate containing fluorinated block copolystyrenes have been developed based on initial ATRP of fluorinated styrene monomers. The strategy depends on well defined
The project proved that PowerShade with an efficiency ratio in excess of 5% can be produced, and that future development will probably further increase its efficiency. The project also showed that the