The vision is that the increased research on main wind turbine uncertainties and risk & reliability will lead to less conservative designs and more cost-efficient wind energy. Therefore, careful
The usage of new reinforcement fibre and resin systems allows for novel forms of blade design, cost optimisation and production methods that significantly reduces the production time.
The HyLIFT-C3 project develops and commercial- ises hydrogen propelled fuel cell hybrid systems for pollution free and time efficient propulsion of forklifts for warehouses and distribution centres.
A platform has been developed for production of enzymatic biodiesel. The production is made flexible to enable the use of a wide range of oil qualities. The processes have been document- ed
Allocation of extra heat is essential for the survival of newborn piglets. Sensors in each farrowing pen provide information about the animals’ welfare and control allocation of heat according to
Break-through new technology has led to a functional prototype with “Switch Mode Power Supply” based on “Piezoelectric Transformer” including energy recovery.
Sensors based on new, patented optical measurement techniques enable extreme ruggedness and the ability to measure several parameters at the same time.
Employing a porous metal structure enhances the robustness of new high temperature fuel cells. Stack modules are being developed with these novel cells, initially for applications such as truck APUs.
To fulfill the next target goals of MEA performance, amount (mass) of platinum used, cost and lifetime defined in the national Danish strategy on PEM FC, it is of utmost importance to develop material
The object of this project is to determine the osmotic power potential in Denmark, including possible locations for and barriers to application of the technology. The environmental aspects will be
The aim of the project is elaborating and making the complete preparation for fullscale demonstration of an entire technical, economic and financial concept.
BIOSYNERGI PROCES ApS
ForskEL
2008
2011
The aim of the project is gathering and successively dissemination of operation experiences with the complete at complete Gasification plant named Castor. As a specific task in the project work will
The option to produce and utilize a slurry of char and pyrolysis oil as an energy carrier will be investigated. The objective of the project is to in-vestigate if a flash pyrolysis unit can be
Biomass is considered an important source of renewable energy needed to realise national and European renewable energy goals and goals for CO2 reduction. Biomass gasification as a technology is
The overall objective is to provide clear understanding and documentation on which measuring technique(-s) should be implemented in existing and future biogas reactors in order to increase
The objective of the project is to document and demonstrate the economic, functional and aesthetical potential of thin-film PV installations under Northern European conditions.
With Thorsø Biogas- & Miljøanlæg (hereafter THMB) as reference case for an assessment of the possibility of applying the existing natural gas grid for distribution of biogas will be carried out
Emissions from gas engines depend on ignition timing and excess of air.Adjustments leading to lower NOx emissions normally lead to increased emissions of unburned hydrocarbons (UHC) and CO. Based on
About 20-25% of the energy used in the EU is utilised for room heating. Even a few % improvement will represent a large quantity of energy saving and CO2 reduction. Thecalculation tool implemented on
The objective of this project is by means of advanced IR as well as advanced camera techniques to increase the knowledge of oxyfuel combustion of biomass and biomass-coal mixtures. Experiments have