The purpose of this project is to design a demonstration plant based on the Low Temperature Circulating Fluidised Bed (LT-CFB) gasification technology. The demonstration plant is based on 2 test
The aim of this project is to find a suitable titration method for measuring volatile fatty acids (VFA) to use for process monitoring of the Danish biogas plants. In the study, several titration
The contents of biogenic (biomass) and fossil carbon in fuels affect the sustainability of the energy production based on these fuels. Today, municipal solid waste contributes with a significant share
Biogas has been pointed out as one of the most profitable renewable technology based on socioeconomic analysis. Expansion of the biogas applications demands however, further optimization and
The project explores the possibilities for a combination of wind power and a large heat pump for heat production in the district heating system of Århus. The environmental and economic impact – for
Incineration plants may optimize their participation in the electricity spot market and balancing markets by actively and fast bypassing the steam from the steam turbine. The possibility of this is
The starting point for this project is that today the Danish turbines are NOT participating in the electricity system balancing tasks. As an alternative to this present situation we will in this
Project results are very focused on the results generated through interviews with power plants, and its conclusion must be said to be interesting for both power system actors in general, but
Kommunekemi A/S. Udvikling
ForskEL
2008
2011
The purpose of the project is to recycle phosphate from ash stemming from mono-incineration of meat and bone meal, manure fibre or sewage sludge. These ashes are rich in phosphorus and may after
In connection with an 2008 expansion and renovation of Lemvig Biogas Plant, various serial operation configurations were tested/demonstrated in full scale. The plant was expanded from having a
The object is to provide input for the existing international standardisation efforts in flexible control of distributed power systems. This includes IEC 61850 and IEC 61970. The work must involve
The mixing of cold and hot gas flows is like mixing water and oil, i.e. it is difficult to obtain perfect mixing and it requires optimized injection of flows. Furthermore, biomass is a high volatile
The objectives of this project are to selectively reform hydrocarbons leaving a biomass gasifier to eliminate downstream problems with tar, simplify the energy recovery of the hot producer gas and to
The utilization of waste/RDF fractions in full-scale, suspension-fired boilers provides a number of immediate advantages, compared to incinerating the waste/RDF fractions on a grate. The investment
Teknologisk Institut
ForskEL
2008
2012
A method for producing liquid, gaseous and solid biofuel from the marine algae Ulva lactuca will be developed. Growth conditions of Ulva lactuca will be optimised through laboratory scale growth
With assistance from DTU and COWI A/S, Weiss A/S established a pilot gasification test plant with nominal capacity of 600 kW thermal power (Project 6529). The plant is an upscaled version of the
The aim of the project is elaborating and making the complete preparation for fullscale demonstration of an entire technical, economic and financial concept.
BIOSYNERGI PROCES ApS
ForskEL
2008
2011
The aim of the project is gathering and successively dissemination of operation experiences with the complete at complete Gasification plant named Castor. As a specific task in the project work will
The option to produce and utilize a slurry of char and pyrolysis oil as an energy carrier will be investigated. The objective of the project is to in-vestigate if a flash pyrolysis unit can be
Biomass is considered an important source of renewable energy needed to realise national and European renewable energy goals and goals for CO2 reduction. Biomass gasification as a technology is