The objective of this research project is to improve the electric energy efficiency of biomass fired boilers (specifically straw). The main focus of the project is on deposit formation on walls and
The energy consumption by the actual ploughing can be separated into two essential main elements: The power needed to break the soil; Friction between the soil and the various parts of the plough. In
The project has comprised the following six milestones: a) status on 2D and 3D CFD computations, b) implementation of improved aerodynamic and structural sub models in the aeroelastic codes FLEX4 and
The development primarily consists of improved computational tools, combination of existing processes as well as introducing new methods and processes.
The background for the project is the fact that it has become technically and economically feasible to use variable speed control of all active components (compressors, fans, pumps) in a refrigeration
The solution proposed in this project is to modify the cylindrical air gap of an electric motor by applying a non-linear axial profile (called Shark profile).
The aims are to make information about Danish energy research and its results available to users in Denmark and abroad and, through international cooperation, to make international research and its
The main goal of ECBCS Annex 36 is to provide the educational building decision-makers with sufficient data, information and tools to improve their learning and teaching environments by improving the
Under the IEA-ETDE (Energy Technology Data Exchange) agreement a common database is produced containing descriptions of journal articles, reports, books, conference papers etc. published in the member
The project has demonstrated a building integrated ventilation system with the ducts system installed outside the facade. The air ducts are installed in a solar tower parallel to the staircases in the
The project activities have been implemented within the framework of the European OPET Network (Organisations for the Promotion of Energy Technologies), supported by the EU Commission. The OPET
Despite the pre-selection of only the most promising energy solutions, the analyses and comparison of the chosen energy supply solution have revealed, that none of them are capable to turn out with an
The project has 2 objects: 1) to produce better chip quality or chunk to the gasification plants and 2) to provide essential data for the Danish as well as international standardisation work.
This project forms the Danish participation in an international IEA working group, which scope was to gather and process monitoring results from 15 low energy houses designed and build during the IEA
The purpose of the project was to construct and test a 2.5kW photovoltaic inverter (DC/AC) based on the same segment-switched stair-step concept developed under the EFP94, which was developed for 10
The project is concluded with an assessment as to whether Denmark should participate activily in IEA TASK 25, Solar Assisted Air. Conditioning of Buildings. The recommendation is that Denmark should
Forskningscenter for Elektroteknisk Energiomformning E/F (CETEC)
EFP
1999
2003
The project will contribute to an increase in the application of energy saving power electronic systems, which is obtained by the following means: 1) integration / miniaturization; 2) low total costs
BIOG supplemental is a small supplement to the project BIOG, Reference: 1383/98-0003. A number of students from Norway and Denmark have wished to stay at ReaTech to perform experiments related to