The project investigated the conditions of applying district heating-driven adsorption heating pumps with underground storage for cooling and heating. The concept is most suitable for buildings with a
The aim of the project is to develop a simulation platform for generation of relevant wind fields applicable for aeroelastic design simulations. This is achieved by development, verification, and
Air tightness must be brought into focus at an early stage in the planning process, and during the construction phase air tightness measurements should be performed, e.g. on facade sections or in
This project evaluated the performance of the ventilation systems in eight childcare centres, four of which have a natural ventilation system and four others a mechanical ventilation system. The
The objective of this project is to analyse the framework conditions for development of energy technologies in Denmark through an innovation perspective. The project is an analytical contribution to
A calculation tool was developed for use of solar energy in renovation and new construction projects - BYG-SOL – for professional clients, local authorities, architects and consultants. The tool may
The objective is to synthesise and transfer to stakeholders important international knowledge and new technical information concerning conventional forestry systems for sustainable production of
Analyse the country-level, regional and global potential of bioenergy, forestation and other biomass based mitigation strategies, including implications for the atmospheric CO2 concentration and
As a specific Danish contribution during the project period, the Bioenergy Group at the University of Southern Denmark updated the report ‘Source separation of organic fraction of household waste’.
The annex will give the participants an overview of the technical and environmental assessment challenges encountered in offshore applications and help them to understand the areas of further R and D
The focus on the Danish part of the IEA project SHC Task 32 Advanced Storage Concepts for Solar and Low Energy Buildings was on Subtask C: Storage Concepts Based on Phase Change Materials and on
The overall goal with the participation in IEA PVPS is to maintain and build upon the knowledge transfer to Denmark via the participation in the IEA PVPS work. By the participation a network is
Dust will be produced during production and use of wood pellets. The most critical situations will be identified and changes in routines and equipment will be suggested. Both central heat plants and
The aim is to make information about Danish energy research and its results available to users in Denmark and abroad and, through international co-operation, to make international research and its
The purpose of the project has been to examine the possibilities for PV in an industrialised building process. The project is an information gathering and development project with basis in knowledge
Under the Danish-Canadian project, Dantherm Power developed a fully integrated UPS system based on Canadian-based Ballard’s air-cooled LTPEM fuel cells. Eleven UPS units were installed to support
Together with the sector suppliers, the project developed a complete testing basis for assessment of the energy properties of ventilation devices on the basis of recognised Danish and foreign
Based on experience with ESCO projects in a number of local authority areas, NRGi Rådgivning developed and evaluated a phase-divided model for an ESCO partnership aiming to make it easier for the
In 1,452 households with remote-read meters in the Syd Energi supply area, customers received regular feedback on their electricity consumption via SMS or e-mail in a pilot project. The subsequent