The project wants to establish and develop a 3.G. hydrogen filling station. The project is a part of the H2moves Scandinavia project. H2moves all around goal is partly to demonstrate cars driven by
The FCH test center has had a good start and today it has a big national as well international network with the most important team players within the field. The first commercial assignments have been
The projecthas developed a methodto measurenoisefromairfoilsinan industrialwind tunnel,which willhelp to increase theDanishwind turbinecompetitiveness.The methodisthe key tonew
HyLIFT-DEMO is to conduct European demonstration of the 3rd generation hydrogen powered fuel cell forklifts and supporting hydrogen refuelling infrastructure. HyLIFT-DEMO has the following objectives
LINK2009 -phase 2 is a continuation of the LINK2009 Phase 1 that was started in August 2008 with support from EUDP2008 (ENS 63011-0069) covering development of 2nd generation fuel cell hybrid vehicles
The main objective in this project has been to develop a tool for SOFC system designing with the aim to accelerate the system optimization and reduce the time to market.
Only the nichemarket is accepting the relatively high prices there is to fine within the fuel cell stack. The high develop costs is holding the stack producers in a spiral characterized by its low
It is a concern in wind energy that wind turbines do not yaw efficiently into the wind due to draw backs of nacelle anemometry. The loss of power is estimated to be 1-3% in flat terrain and offshore
During this project an up-scaled, near commercial CatLiq plant has been designed. The plant is capable of converting low value feedstock such as pig manure into a high value bio oil, which can be used
There has been a further development regarding the manufacturing of bio ethanol from straw and other residues, were the production prices has been reduced to 2 kroners per liter bio ethanol.
The main goal of the project was to develop, demonstrate and implement new tools, models and components in the design process for aeroelastic optimization of Mega-Watt wind turbines with the scope of
The objective of the project was to improve the efficiency of anaerobic digestion of dairy cattle manure. The NiX® treatment improved by 48% the methane yield of the second step of the biogas process
GMR machines and a couple of project participants will develop a prototype and a pilot series of fuel cell driven electrical car. The energy source for the electrical cars comes from a HT-PEM fuel
One of Dong Energy's subsidiaries, Inbicon, has developed a technology that manufactures bio ethanol from non food sources, such as wheat straw. A demonstration plant is made in this purpose. Markets'
The project has used tools for process simulation to improve understanding of wind turbine blades. Based on the measurements, the project participants designed a new wing, followed by a demonstration
In the project, a chemical reactor system, called OBATE reformer, has been developed to convert ethanol to diethyl ether and water in order to make it into a diesel fuel. It is shown that the
To obtain cost-efficient and environmental-friendly heat supply focus is put on district heating. Requirements to cost-effective biomass combustion technologies for district heating are: 1) High