The purpose of the project is to develop demonstrate and document a new renovation concept for existing multi storey housing, reducing the energy demand to Low Energy Class 1. Results are disseminated
There has been a further development regarding the manufacturing of bio ethanol from straw and other residues, were the production prices has been reduced to 2 kroners per liter bio ethanol.
The objective of the project was to improve the efficiency of anaerobic digestion of dairy cattle manure. The NiX® treatment improved by 48% the methane yield of the second step of the biogas process
One of Dong Energy's subsidiaries, Inbicon, has developed a technology that manufactures bio ethanol from non food sources, such as wheat straw. A demonstration plant is made in this purpose. Markets'
The goal was to investigate and demonstrate the abillity to store excess heat in the subsoil down to 100 m in so-called energy wells, and then use the accumulated heat via a heat pump during winter.
DTU has transferred a production technology for the manufacture of plastic solar cells to Mekoprint. Factor 3 has developed electronics that optimize the function of the plastic solar cell lamps and
In the project, a chemical reactor system, called OBATE reformer, has been developed to convert ethanol to diethyl ether and water in order to make it into a diesel fuel. It is shown that the
The project is the Danish part of the second and third year of the IEA project, International Energy Agency Solar & Cooling Programme Task 42 project Compact Thermal Energy Storage: Material
To obtain cost-efficient and environmental-friendly heat supply focus is put on district heating. Requirements to cost-effective biomass combustion technologies for district heating are: 1) High
The objective of the project is to assure that Danish solar thermal products follow European state of the art in quality standards and product development in order to increase sale of Danish products
Development of 2D infrared spectroscopic tomography system for in situ studies of flames and hot gasses. The starting point is 2D reconstruction of temperature and concentration profiles as well as
Development and testing different methods to fasten mono crystalline solar cells to a standard zinc roof system and finding different mono crystalline solar cells to find the optimal configuration.
PolyStaR aims at demonstrating large-area processing of polymeric solar cells with improved stability and reliability. A transnational consortium addresses the problem of unifying power conversion
The objective of the project is to investigate the process during heat treatment of biomass at 230-300 Centrigrades without air, so-called torrefaction, for potential upgrading of biomass for Danish
The project etablishes a large-scale PV cell system in a completely new canvas structure above the roof of the stand at Hvidovre Stadium as part of the development of a ground-breaking concept for
This project commissions the 500 kW gasifier in the town of Hillerød. The aim is to utilise the experience gathered from the pilot system in the town of Hadsund and develop the system to increase
The objective of the project is to add a time-limited amount to the electricity production settlement price from biomass gasification to allow the project group to demonstrate that, long term, the
The overall objective of the project is to provide a precise determination of the biogas potential and the ultimate methane yield of manure from a broad range of animal categories and how it is
The project is implemented by the Danish part of a consortium of partners from Sweden, Germany, Denmark, Norway, Finland and Estonia, and is a project of the N-INNER program. The aim was to develop
The stringent European and Danish environmental regulations represent a significant challenge for the livestock industry and demand the development of cost-effective mitigation technologies. The new