The project ” Multi-level medium voltage” converter is a development and demonstration project, which by proposing at new design aims at optimizing one of the most important subsystems in a wind
The objective is to coordinate, strengthen and target the Danish RD&D work for thermal gasification in a way that thermal gasification can fulfil its potential in the envisioned future Danish energy
The purpose of this project is to obtain a foundation for dimensioning of a NOWEAR downsizer for downsizing of biomass. Wood pellets and chips will be downsized in an inertia mill, where the biomass
To learn how to build the hybrid UHPC tower in praxis and prepare the technology for commercialization. Further development to up-scale the towers to larger heights, to make the towers entirely from
Task 35 will focus on wind turbine blade and drive train testing and assess their performance and failure criteria in different operating scenarios. The subtasks are: l) Relevant wind turbine
The objective of this proof of concept project is to investigate the WaveSpring technology and how it can benefit wave energy converters (WECs). It is expected that the results from the project will
Our objective is to demonstrate an efficient, rugged, low-cost lidar for wind turbine blade pitch control. The new sensor will monitor the wind in front of the turbine using 4 lines-of-sight. This
The purpose of the project is to investigate the future testing strategies for the leading wind turbine manufacturer, to design, develop, assemble and demonstrate the future testing facility to
The objectives of the project are to design, test and develop cost efficient mooring solutions for large floating wave energy converters (WECs) and to build national competences in design and
In this project Danish and Swedish partners possess complementing technologies comprising the whole Chain leading to 2. generation bioethanol production. The project aims in demonstration scale to
Gas from biomass gasifiers contains a significant amount of hydrogen sulfide that must be removed if the gas is to be converted to e.g. synthetic fuels. The purpose of this project is to remove the
The New European Wind Atlas wiII as a minimum include: wind resources and their associated uncertainty; extreme wind and uncertainty; turbulence characteristics; adverse weather conditions together
The project aims to develop a new node for offshore wind foundations. Objectives are: 1) New design for process and assembly of jacket foundations; 2) Cost-efficient welding of nodes; 3) Mass
The project SYNFUEL is reasearching how to combine electrolysis and gasification of biomass in a way that produces more biofuel from the same ammount of biomass.
ElectroGas develops knowledge and technology which can take surplus electricity from renewable energy and use it to upgrade CO2 to CH4 by feeding it to microorganisms present in biogas reactors.
SYNFERON aims at establishing a new technology platform that combines thermochemical and biological processing of biomass in order to make the production of biogas easier.
Air traffic will be dependent on liqued fuels in all foreseeable future. The goal of FLABBERGAST is to develop an environmentally sustainable production of bioethanol that also fulfills the physical
The foundation for wind turbines at sea needs to withstand occational extreme waves. Extreme waves are a well known phenomenon, however the exact stress they put on under water foundations are not
The objective of this project is to develop and demonstrate a 10 MW pressurized entrained flow gasiflcation technology that can utilize low quality biomasses in the energy sector in an efficient and