The purpose of this project has been to make preparation for organisational, legal and technical nature with regard to a coming upgrading of BioWynergi Process ApS 450 kWh Open Core stage-phased
DANISH FLUID BED TECHNOLOGY ApS
ForskEL
2007
2012
The overall goals of the project have been to contribute to the continued development of the LT-CFB gasifier, facilitate a small full scale demonstration plant and otherwise improving the basis for
This project has validated the use of the noise prediction model Nord2000 for more detailed noise prediction from wind farms compared to conventional methods like the ISO 9613-2.
Ørsted A/S
ForskEL
2007
2012
National and international research gas not only revealed that the conversion of biomass particles in suspension-fired boilers differs from the conversion of pulverised coal - it has also, through
The long-term vision of the project was to develop a system for online optimisation of waste incineration. The idea is to base the system on advanced measuring technique, dynamic process models and
In situ simultaneous measurements of gas temperature and gas composition are of great interest in combustion research. An optically based technique can be performed in situ for various extremely hard
The purpose of this project is to investigate oxyfuel combustion of biomass and biomass-coal mixtures in semi-technical scale and supplemented by laboratory experiments and process simulations to
During the project, investigations and development has been performed, focusing on an evaluation of the overall feasibility of gasification of solid biomass in general.
In the present project was investigated how and to which extent the effluent from the biogas process has to be purified in order to recirculate this stream as process water in the MaxiFuels process
The objectives of this project is to improve on the current practice of basing performance evaluation on a single point measurement of wind speed and instead introduce a method where the wind field
This project has investigated noise emissions from large-scale wind turbines in relation to small-scale wind turbines. In addition, noise nuisance at low frequencies was investigated, noise
Due to difficulties in achieving data, consistency in data, and concensus on data as expected and agreed in the project outline among the project partners, the project unfortunately could not be
The aim of the project is to develop a simulation platform for generation of relevant wind fields applicable for aeroelastic design simulations. This is achieved by development, verification, and
The objective is to synthesise and transfer to stakeholders important international knowledge and new technical information concerning conventional forestry systems for sustainable production of
Analyse the country-level, regional and global potential of bioenergy, forestation and other biomass based mitigation strategies, including implications for the atmospheric CO2 concentration and