The project aims to enhance current knowledge of how temperature and pressure during the production process and the water content of biomass affect pellet quality, and of the mechanical properties of
Through contacts to key players in the biofuels market, various means and policies are considered to identify the most apporpriate package solutions. The results will be used by the European
IEA task 42 identifies existing biorefineries and process potential, prepares common definitions and standards for classifying and assessing technical, financial and environmental advantages and
Methods are devised for online control of biofuel pellet quality using, for instance, mechanical durability, fine particles, pellet density and length and particle size as parameters. The new methods
The project enables Denmark to resume its activities in the IEA implementing agreement on hybrid and electric vehicle (IA-HEV), dealing with, for instance, electric cars with batteries and fuel cells
These two projects continue the publication of the eight-page news magazine Bioenergy Research with six issues a year. The magazine goes over new research results and features debate-triggering and
One of the current topics of the IEA’s cooperation on research in fuel wood chips is forecasts of fuel resources, technical production, wood fuel transport, valuation, long-term storage of decomposed
Process optimisation is performed at the MaxiFuels pilot plant at DTU in the context of, for instance, membrane distillation of ethanol, separation of the permanent residual fraction from glucose
The Castor plant’s gasification reactor is developed to gasify wood pellets instead of wood chips, and an aesthetic and technically efficient design of the plant is developed for adaptation into a
The developed CFD model shows qualitative and quantitative correlation between the model and experiments in a lab scale reactor. When the developed model was implemented in the full-scale plant, it
To develop the market for solid biofuels within the EU, standards are urgently needed. Based on a mandate given by the EC, CEN TC 335 "Solid Biofuels" currently develops such standards based on the
Nanotechnology can provide possibilities for obtaining new valuable information regarding performance and corrosion protection in power plants. In general, the desired performance of the contact
Use of cellulose for biofuel production requires the cellulose to be degraded into small molecules. Several different enzymes can be used for this prupose. The project aims to develop a method for
The purpose of this project has been to make preparation for organisational, legal and technical nature with regard to a coming upgrading of BioWynergi Process ApS 450 kWh Open Core stage-phased
DANISH FLUID BED TECHNOLOGY ApS
ForskEL
2007
2012
The overall goals of the project have been to contribute to the continued development of the LT-CFB gasifier, facilitate a small full scale demonstration plant and otherwise improving the basis for
National and international research gas not only revealed that the conversion of biomass particles in suspension-fired boilers differs from the conversion of pulverised coal - it has also, through
The long-term vision of the project was to develop a system for online optimisation of waste incineration. The idea is to base the system on advanced measuring technique, dynamic process models and