Develop and demonstrate a simple combustion system to the DTU developed Stirling engine, and solve known issues with seals and automatic lubrication, and through months of continuous operation
The objective is to coordinate, strengthen and target the Danish RD&D work for thermal gasification in a way that thermal gasification can fulfil its potential in the envisioned future Danish energy
The purpose of this project is to obtain a foundation for dimensioning of a NOWEAR downsizer for downsizing of biomass. Wood pellets and chips will be downsized in an inertia mill, where the biomass
In this project Danish and Swedish partners possess complementing technologies comprising the whole Chain leading to 2. generation bioethanol production. The project aims in demonstration scale to
Gas from biomass gasifiers contains a significant amount of hydrogen sulfide that must be removed if the gas is to be converted to e.g. synthetic fuels. The purpose of this project is to remove the
The project SYNFUEL is reasearching how to combine electrolysis and gasification of biomass in a way that produces more biofuel from the same ammount of biomass.
ElectroGas develops knowledge and technology which can take surplus electricity from renewable energy and use it to upgrade CO2 to CH4 by feeding it to microorganisms present in biogas reactors.
SYNFERON aims at establishing a new technology platform that combines thermochemical and biological processing of biomass in order to make the production of biogas easier.
Air traffic will be dependent on liqued fuels in all foreseeable future. The goal of FLABBERGAST is to develop an environmentally sustainable production of bioethanol that also fulfills the physical
The objective of this project is to develop and demonstrate a 10 MW pressurized entrained flow gasiflcation technology that can utilize low quality biomasses in the energy sector in an efficient and
We will optimize stalk as a biomass. By pregrinding the stalk, we can reduce the residence time in the biogas reactor. The particle size of 05-15 mm. will be much easier to organically convert, and we
The project seeks to develop the key to commercial bio refineries that through compression and plug-flow treatment of biomass can facilitate cost and energy effecient storage, transportation, and pre
The purpose ofthe project is to conduct a feasibility study on how biogas can recover energy and nutrients from urban waste in a sustainable way (economically, environmentally and politically). The
This project includes completion of project 2008-1-0164 "Selective Hydrolysis of Sludge, phase 2".The mentioned project showed profound effect of Selective Hydrolysis on digestion and biogas
AMMONOX focuses on developing a sustainable and economically attractive, ammonia-based process for a) enhancing the productivity of biogas plants based on manure, b) minimizing NOx emissions from gas
Loss of methane from biogas plants has detrimental environmental effects and reduces the efficiency and economic output of the biogas production. The aim of this project is to reduce the methane loss
This project proposes a bioenergy concept in which cast seaweed collected from beaches will be used as substrate in co-digestion with manure and other wastes in biogas plants for energy production
The vision of the present project is an online Predictive Corrosion Monitoring System (PCMS) that through measurements of few, significant flue gas components can predict and hence optimise the
This project identifies the economic and technical potential and barriers for increased power production and reduced loss of heat on district heat production by means of reduced temperatures and local