A main result of the Low Cost Active House BIPV project is to realise a demonstration campaign with 3 MWp, low cost BIPV solutions in connection to low energy class 2020, energy neutral and plus
Combining silicon solar cells and high efficiency solar cells into one cost-efficient, high-efficiency solar cell has been a dream of the solar industry for decades. However, differences in the
Grid side converter (GSC) is the key for PV integration. GSCs are still not capable of advanced control features that enable the full control of PV systems with fault ride through, reactive power
The overall target for this project is to develop an industrialized concept for Building Integrated Solar PV-BIPV that visualizes a number of added values, minimizes additional costs and thus paves
The aim of the project is to work with Danish housing associations to organise sketch designs and realisation of building integration of PV solutions (BIPV). The total proposed implementation for roof
The purpose of the project is through applied research and development to demonstrate and develop a building-integratable, transparent PV module harvesting direct sunlight, acting as intelligent
An energy payback time less than 1 year for a complete polymer solar cell plant is now reality. DTU, EnergiMidt and Gaia Solar are now taking the next crucial step towards sustainable reliable energy
The scope for the EVCOM project is to specify harmonized data formats for exchanging data for controlling, regulating and billing EV charging in Denmark. The data formats must support a wide number of
HPCOM project supports the development and implementation of information- and data- communication infrastructure within the area of individual heat pumps. The project covers data communication from
A considerable amount of power is used for pressurizing industrial processes such as fermentation processes. This project is aiming of recover power in an economical attractive way by utilizing the
In the BIPV Quality Cities project the total amount of PV systems with special focus on BIPV Quality, Solar Watch online monitoring and a combined focus electricity savings will amount to 3.850 kWp.
The main purpose of the planned Phase III (PVIB-III) is establishment of 1,5 – 2 MW of additional capacity primarily in terms of a large utility scale PV power plant of at least 1,5 MW. Thus very
This project focuses on the integration of photovoltaics (PVs) with thermoelectric generators (TEGs) and microchannel heat exchangers (µHX) in two parallel phases: low-thickness solar power systems
This project supports an improved practice on public participation in infrastructure planning. The project has point of departure in Energinet.dk's planning and uses Danish experiences to develop and
The scope of PV GRID is to address the large potential for stimulating commercial investment in PV in DK. The project purpose is to address identified barriers and assign possible solutions. A central
Danmarks Tekniske Universitet (DTU)
ForskEL
2012
2014
The purpose is to achieve an energy pay-back time of less than one year for a complete grid-connected installation with polymer solar cells. The project comprises development of polymer solar modules
Based on an interest of Energinet.dk, the aim of the project is to develop procedures and criteria for integrating environmental concerns in the administration of the ForskEL-programme. Through
This project aims to support the integration and higher penetration of PV systems into the electrical power systems by advanced grid condition monitoring and grid control, Diagnostics and failure