Efforts to change road transport is focused on electrifying the transport sector. The main disadvantages of this strategy are that it requires replacing the existing vehicle fleet and an entirely new
The main purpose of this project is to develop and demonstrate an optimized heating plant that will have much higher efficiency and much less CO2 emissions than the heating plants that are built today
The purpose is to develop a sustainable, operational and commercially viable biofuel to replace currently used fossil-based fuels in the maritime sector. Developments are based on patented.
The aim of the project is to develop ensiling as a method for pretreatment of straw which allows use in biogas plants and ensures a higher biogas yield. Wet or moist straw is treated with ’ensiling
Biowaste2Gas’ laboratory scale model is upscaled to a pilot plant. Following the initial testing, the plant is moved to demo-site for lifetime testing. In parallel, AU documents the potential in
InjectMe develops a biological Power-to-Methane technology that uses electricity and CO2 from biogas to produce biomethane (electrofuel). The aim of InjectMe is to develop a cost-efficient system for
Demonstrating that the effect of using pre-treated low valuable biomasses is an improved capacity of any given biogas plant by demonstrating that the pre-treatment provides the same amount of
The objective is to increase access to knowledge on thermal gasification of biomass in Denmark through participation in IEA Bioenergy Task 33 on Thermal Gasification of Biomass and through
The Organic Fuel Technology (OFT) process is developed to produce bio oil from organic materials like straw or organic waste, using an innovative process based on microwave enhanced catalytic
The Hydrofaction technology is a next generation hydrothermal technology that can convert low value organic feedstocks into a cyncrude with high heating value (35-39 MJ/kg), which can be used directly
The project aims to develop a business area with-in the field of small biomass-fired cogeneration plants by
demonstration the operation of a 100 kW plant based on ORC technology. The facility must
Using an optimal combination of recent danish developments in efficient technologies for pretreatment,
enzymatic hydrolysis and of modified fermenting yeast, 2. generation bioethanol can in theory at
The aim of the proposed project is to develop reliable and efficient combustion systems based on
integration of an advanced vision-based sensor and extended grate controllability with an adequate
inte
The objective of this project is to develop a gasification technology that can utilize low quality biomasses
in the energy sector in an efficient and flexible way. This objective is achieved by