The New European Wind Atlas wiII as a minimum include: wind resources and their associated uncertainty; extreme wind and uncertainty; turbulence characteristics; adverse weather conditions together
The HyBoost project is to increase the capacity and reduce the cost hydrogen refuelling stations. New designs for critical components are to be developed and advanced materials science applied to
The purpose of the project is to follow the performance of two pit heat storages and one borehole storage implemented 2011-3013 in Denmark. In the project monitoring results and experiences from
Waste water treatment plants can become net energy producers, delivering electricity and heat at a competitive price. Envidan and Per Aarsleff aim to build such plants in Denmark and internationally
The objective of participating in IEA Hydrogen Implementing agreement task 31 successor is to increase and to communicate Danish safety research knowledge on hydrogen technologies. Participation i
The project aims to develop a new node for offshore wind foundations. Objectives are: 1) New design for process and assembly of jacket foundations; 2) Cost-efficient welding of nodes; 3) Mass
Decarbonisation of the transport sector depends on greater uptake of EVs, but buyers worry about driving range and comfort- especially in winter where cabin heating drains the battery and reduces the
The aim of the project is to participate in IEA Hydrogen Implementing Agreement (HIA) task on Power to Gas in order to stimulate Power to Gas R&D activities in Denmark and to co-ordinate Danish and
The project shall develop a highly reliable uninterruptible power supply system for use in fibre networks, mobile networks and railroad systems. The system is based on fuel cells for power generation
This project will develop an upgraded exhaust valve for large diesel engines. The new exhaust valve will allow higher exhaust gas temperatures, leading to higher waste heat recovery system efficiency
Dantherm Power is developing a 2.5 kW platform targeting the micro CHP and supplemental market. The overall objectives of this project are (1) Reduce cost of ownership by reducing capital and
The objective of this project is to develop and demonstrate a 10 MW pressurized entrained flow gasiflcation technology that can utilize low quality biomasses in the energy sector in an efficient and
We will optimize stalk as a biomass. By pregrinding the stalk, we can reduce the residence time in the biogas reactor. The particle size of 05-15 mm. will be much easier to organically convert, and we
As different renewable energy sources, like sun, wind and biomass, become more widespread as energy sources in the different energy grids in urban areas, the aim of the project is to investigate how
The purpose of the project is to develop LED lighting solution for EX areas that comply with the requirements for the EX standards concerning protection against explosive gas atmospheres, combustible
Standardization work with the aim to find common standards for: Inductive charging is a new method for charging EV,s. There´s no commercial available products. Thereis a need for standardization. V2G
The purpose is to develop and demonstrate a new efficient and flexible technology for fault localization/-diagnosis in PV systems. The technology is aimed the growing PV service market. Measurements
Heliac has invented and patented a foil that enables a reduction installation costs of solar fields from 500$⁄m2 to 2- 10$⁄m2 and reduce the overall cost by 80%. Proof-of-concept in lab scale was
The aim of the project is to participate in IEA Hydrogen Implementing Agreement (HIA), in order to stimulate hydrogen R&D activities in Denmark and to co-ordinate Danish and international scientific
The project objective is to test, verify and document the radar control installation aiming at defining the minimum requirements for this type of system capability. The project will also investigate