Development of processes and tools for sustainable operation of building automation. In proper operation of the technical systems in buildings, e.g. CTS / BMS and IoT, it is possible to reduce the
This project aims to demonstrate control of flexible electricity consumption in Navitas, an office building in Aarhus. The optimization is based on forecasts for electricity consumption, self
The project will expand on a proved concept for energy conservation in large kitchens, combining precise measuring with tailormade advice on behavior change, and develop this concept into a more
The current project is focused on designing, developing and demonstration of a small capacity (300 kg/day of fresh product) portable air-to-air heat pump drying system that is based on CO2 as
Development and testing of a highly efficient and competitive heat pump for energy-efficient houses. The aim of the project is to develop a heat pump with a SCOP of 6.0 for floor heating (according to
Optimization of energy consumption in LED street lighting is more than LED chips with higher efficiency and intelligent management. There is a potential in optimizing and reducing the energy
ProfoundEnergyrenovation of aproperty where theowner and the tenantis not the samedecision maker,havedifficultconditionsandwiththe necessary investmentsoftenlies withthe ownerwhile
Housing listed as Building Class 2020 sets strict requirements for the ventilation system, as the building envelope becomes significantly tighter, and due to specific requirements for the thermal
The project is based on a new idea enabling the use of plastic in an expansion engine to utilise the expansion energy in refrigeration plants. 10-20% of the consumed energy in refrigeration can be
Freeze concentration is an energy efficient and careful alternative to evaporation which consume 6 % of the total energy consumption in the Danish industry. It is more efficient than the best
BeREAL is a software application – an ad-on to Be10. It can explain the differences between estimated energy use and operational energy use in a given building. Is the performance gap caused by
Principal development and functional analysis of a new concept called a semi-2-stage heat pump intended to be able to efficiently produce hot water at high temperatures at 110 °C and at a temperature
Occupant behaviour in connection with renovation of residential buildings can affect energy consumption more than the nature and extent of energy saving measures in themselves. The project will focus
The project aims to realize a number of solar-powered OLED concepts for the urban environment and develop the necessary controller technology to do so. The project will seek to bring two products to
This project examines the possibility for optimizing hot-gas defrost in industrial refrigeration systems. The focus is on optimizing the design of the system and also adding a compressor for
There are considerable and not yet identified efficiency opportunities in compressed air systems, which can be identified through a demand driven approach supported by much more extensive measuring of
The aim of the project is to develop guidelines for optimising energy savings, economy and CO2-reduction in connection with energy upgrading to low energy level based on two apartment buildings
A membrane based enthalpy recovery unit may contribute to a reduction of 10-20 % of the energy demand for ventilation in comparison to conventional ventilation systems. However, practical problems
The aim of the project is to demonstrate the potential for reducing energy demand for ventilation in governmental institutions. The project will develop, test and analyze control principles for a