The project is testing a new type of IoT sensor technology. Today, the individual IoT sensor must be connected to power or contain batteries. New technology based on induction, makes it possible to
Investigation of the potential for optimized and reduced energy consumption via improved installation, monitoring and continuous adjustment of heat pumps in Danish homes, using IoT enabled machine
Plastic production is an energy intensive process with a high heating and cooling demand. The project will convert direct electricity use to an integrated solution, where the supplied energy is
In the project, a self-learning predictive control is developed and demonstrated that can de-liver the best possible indoor climate at minimal energy consumption. This is achieved with a digital twin
An intelligent adaptive control is being developed for heat pump-driven decentralized ventilation systems. This type of system is gaining ground on the basis of a sustainability criterion, as the
Disinfection with ultraviolet (UV) radiation is an effective but energy consuming way to control the corona pandemic. New UV-LED technology enables new applications of UV-light with potential energy
International lighting standards set important conditions when it comes to saving energy on
lighting. The project will incorporate greater attention to energy savings combined with lighting
quality in
The aim is to develop an electrified fast process for continuous heat treatment of solid foods using ohmic heating. The process is very energy efficient as the energy loss is only around 5%. In
The project shall uncover and realize potentials for energy savings on ventilation systems in public buildings using artificial intelligence on data concerning energy usage, indoor environment
In industry, despite previous efforts, there is still a large realizable potential for energy savings. With the project's developed IT software package, energy audit consultants and energy man-agers
This project focuses on synchronous re-luctance motors, and the frequency converters based on the WBG technology which both will increase the efficiency of the motor systems. The technologies are
Even though the technological possibilities haven’t been better for creating the right indoor climate in buildings together with low energy consumption, the overall situation is quite poor. The area
Renovations of existing buildings have primarily focused on the energy consumption and thermal comfort. This project involves health as a priority design parameter, and through an exemplary case study
The project will develop a dynamic facade system that can be mounted directly on the outside of existing windows or produced as an accessory for new windows, and can reduce the building's energy needs
A ceiling providing hybrid ventilation and cooling of office buildings is developed, including: System design balancing mechanical and natural ventilation; control of air volumes and velocities
Glary light causes the eye's pupils to contract, thereby preventing part of the light from reaching the retina. The lighting becomes ineffective physiologically. The project will identify and