RUNE is short for - Reducing Uncertainty of Near-shore wind resource Estimates using onshore lidars. The key project aim is to reduce the uncertainty of offshore wind resources in Danish near-shore
New cooling technology and newly developed communication and management solution allows access to untapped reserves the telecommunication companies. Reserves that are already established. The way to
The purpose of the project is final engineering, drawing, design, production and installation of a Crestwing prototype close to full scale. It will show its potential and demonstrate its high
Solid oxide electrolysis cells (SOECs) are a promising technology for energy storage and synthetic fuel production and it has a unique potential for grid regulation in the Danish power system. This
A main result of the Low Cost Active House BIPV project is to realise a demonstration campaign with 3 MWp, low cost BIPV solutions in connection to low energy class 2020, energy neutral and plus
The goal of SDVP Connect is to mobilize the Heat Pump ITC-platform, developed in collaboration with Energinet.dk and ForskEL, on the Smart Grid market.
Combining silicon solar cells and high efficiency solar cells into one cost-efficient, high-efficiency solar cell has been a dream of the solar industry for decades. However, differences in the
Grid side converter (GSC) is the key for PV integration. GSCs are still not capable of advanced control features that enable the full control of PV systems with fault ride through, reactive power
The overall target for this project is to develop an industrialized concept for Building Integrated Solar PV-BIPV that visualizes a number of added values, minimizes additional costs and thus paves
Power-to-gas (“P2G”) is an innovative and disruptive energy storage solution ideally suited for the Danish energy system. The P2G-BioCat Project is led by a consortium of highly qualified
The purpose of the project is through applied research and development to demonstrate and develop a building-integratable, transparent PV module harvesting direct sunlight, acting as intelligent
The SmartMEA project aims to develop the next generation high temperature PEM electrodes for improved durability and performance working under SmartGrid conditions. Focus is on electrode optimization
To fulfill the Danish Government's ambitious plan regarding renewable energy, some technical and economical hurdles have to be cleared. A major issue is energy storage. This project will present
An energy payback time less than 1 year for a complete polymer solar cell plant is now reality. DTU, EnergiMidt and Gaia Solar are now taking the next crucial step towards sustainable reliable energy
The purpose of the project is to analyse and develop advanced filter solutions based on combinations of passive filters and active filters in wind power plants. The use of passive filters is almost
This project will develop oxygen blown biomass gasification combined with oxygen transport membranes (OTMs) for efficient conversion of waste biomass to electrical energy. During the project, a 1st
The project will result in recommendations for integration of heat pumps in existing distribution grid, which otherwise risk to be overloaded. The recommendations will be based on analysis of
In order to efficiently provide system services to the distribution grid, aggregators of flexible DER units require information about the topology of the grid. This information is currently not
Solid oxide fuel cells (SOFCs) are an energy conversion technology that can play a key role during the transition to 100% renewable energy in Denmark. This project aims to enhance the lifetime of