The project includes two annual meetings of the working group, where information and ideas are exchanged. BPSE will share the information form the work in IEA-Task 39 in relevant meeting in maritime
The aim of the project is to participate in IEA Hydrogen TCP, in order to stimulate hydrogen R&D activities in Denmark and to co-ordinate Danish and international scientific work on hydrogen and
The purpose of the project is to; develop, build and test a filter system that can process product gas from a gasification process so that this gas is prepared for subsequent use. In addition to this
HyTon is to develop the world’s largest hydrogen compressor, capable of dispensing renewable hydrogen for zero emission cars, busses and trucks at large scale. The increased capacity is to enable
The eFuel project represents a new and better way of producing electro-fuels, building on a well-known technological basis. The project will develop and build a large-scale prototype bio-trickling
The purpose of the Straw2Gas project in full is to demonstrate the use of straw fibres from the JENA straw treatment plant for the production of biogas, and thereby open for a commercial and technical
COBRA Drive has the purpose to advance the Reformed Methanol Fuel cell technology to a level where it can replace diesel engines in Light Commercial Vehicles.
Demonstration of a SOEC-based ammonia synthesis gas production without an air separation unit and use of ammonia in SOFC in parallel with techno-economic studies.
The purpose of the Power2Met project is to develop, design and build a pilot plant for a complete, standardised and modular power-to-methanol plant that can be offered to upgrading biogas plants
AMMONOX focuses on developing a sustainable and economically attractive, ammonia-based process for a) enhancing the productivity of biogas plants based on manure, b) minimizing NOx emissions from gas
Loss of methane from biogas plants has detrimental environmental effects and reduces the efficiency and economic output of the biogas production. The aim of this project is to reduce the methane loss
This project proposes a bioenergy concept in which cast seaweed collected from beaches will be used as substrate in co-digestion with manure and other wastes in biogas plants for energy production
The vision of the present project is an online Predictive Corrosion Monitoring System (PCMS) that through measurements of few, significant flue gas components can predict and hence optimise the
This project identifies the economic and technical potential and barriers for increased power production and reduced loss of heat on district heat production by means of reduced temperatures and local
In order to reduce emission of the green-house gas CO2, power plants shall increase the use of biomass as fuel in the future. This challenges, however, the flue gas cleaning for the environmentally