InjectMe develops a biological Power-to-Methane technology that uses electricity and CO2 from biogas to produce biomethane (electrofuel). The aim of InjectMe is to develop a cost-efficient system for
Demonstrating that the effect of using pre-treated low valuable biomasses is an improved capacity of any given biogas plant by demonstrating that the pre-treatment provides the same amount of
The purpose of this project is to…
1) design, build and demonstrate a high temperature fuel cell system for green fuels with an effi-ciency more than 40 % higher than state-of-the-art gensets for
The scope of the project is to develop and test an injector technology that will enable the use of alternative fuels in combination with conventional diesel fuel oils. The combustion of methanol and
The purpose of this project is to perform a feasability study on the potential of establishing a full scale demonstration plant that can support a circular energy production on Samsø and help make it
The project is motivated by a need for de-risking of central process steps related to a new application of Hydrofaction for conversion of high ash containing urban waste streams to green
The project will demonstrate the eSmr-MeOH technology in an industrial relevant siza to enable commercialization after the project. Combined with techno economic evaluations, this will elucidate how
The purpose of developing a small scale version of the Ecodrying Bio-refining plant is to ease the handling of horse manure for individual properties keeping horses and to turn their horse manure into
The aim of the project is to develop an energy-efficient biomass boiler for straw combustion. The boiler must have a high efficiency and low NOx emissions. The goal is to reduce NOx emissions without
The objective of the project is to develop a special wheeled mixer vessel designed for pretreatment of straw and deep litter before utilization in an agricultural biogas plant.
The aim of the project is to provide the best possible technological solution for the production of garden park chips with acceptable technical specifications and at the same time pave the way for a
During production of biogas different malodorous compounds are formed, e.g. hydrogen sulfide (H2S) that, without proper waste air treatment, can be a major nuisance towards neighbors to the biogas
The objective of the project is further development and documentation of the online measurement system into an operational tool for real time monitoring and optimization of the biogas process in
To take a critical lead forward towards a cost effective and sustainable pipeline between the unutilized global bimass resources on one side and the demand for "green" fuel products on the other side
The goal of 3R is to develop an efficient process for environmentally friendly recovery of precious metals to make them available for reuse in fuel cells and electrolysers, which will be in great
The purpose of the project is to demonstrate how energy production from offshore wind can be utilized to produce renewable hydrogen through electrolysis in an integrated system, where the hydrogen
The BE-Clean project will demonstrate a new cleaning process. The process will remove unwanted
sulfur from biogas. The new process is cheaper than currently available technologies and uses
electricity
The objective of BIO-ReFuel is to design, produce and test a small biogas to methanol modular
demonstration plant that can produce 426 liters of methanol from approx. 240 m3 of biogas per
day.