The project purpose is to ensure that a large fraction of the potential for mass- and energyintegration can be exploited in industrial process plants. Today a significant fraction of the potentially
It is the purpose of the project to develop and energy efficient 'straightner' ventilation aggregate with an integrated 'chopper' heat exchanger for single-family houses, buildings of flats, offices
The aim of the project was to test the recently developed VFA online sensor under long-term operation at a large-scale biogas plant (Lintrup). The goal was to identify requirements of the system for
One objective of the project is to investigate the possibilities of developing controlled facade inlets at floor-height for natural ventilation by displacement ventilation, which does not result in
The objective of the project's Phase 1 is to evaluate the possibilities of system solutions with thermoactive constructions acting both as heating and cooling system under Danish conditions and with
A model of a updraft gasifier was established. Problems about solving the system of equations was realized. Experimental results about heating up and pyrolising wood chips was created.
The project has included the Danish Representation in the Technical Committee for biomass Utilisation, task 32, Biomass Combustion and Cofiring during 2001. The Activity is referring to the IEA
The main objective is to achieve higher combustion efficiencies and lower environmental impacts of biofuelled boilers by improving process control to take into account variations of the moisture
The objective of the IEA task is to synthesise and transfer to stakeholders important knowledge and new technical information concerning conventional forestry systems for sustainable production of
The main objectives of IEA Task 38 Greenhouse Gas Balances of Biomass and Bioenergy Systems are to calculate, analyse and assess the effects and impacts on greenhouse gas emissions of (1) substitution
This project describes a plug-and-play concept for intelligent components in heating installations. Intelligent components differ from traditional components by having 'intelligence' in the form of
The object of this project was to investigate the possibility of replacement of electrical heaters with gas fired burners in the mould flow industry. Different kinds of barriers, why gas is not used
The object of the project is to develop a new treatment process for nitrogen removal, primarily to be used in wastewater treatment in the industry. The deammonification process offers a substational
The political and technical objective of the project is to ensure an efficient outcome of the Danish participation in the international work group IEA Bioenergy Agreement, Thermal Gasification of
The long-term objective of the project is to improve the energy efficiency and to increase the annual operating hours for furnaces for waste and/or biomass combustion. The project objective is
The subject of this project is a total integration of a switch mode audio power amplifier and an electro dynamic loudspeaker into a single unit using the voice coil of the loudspeaker as an output
Power converters are used in various areas like power supplies, motor drives and for power conversion at energy production systems. The use of Zero-Voltage-Switching in power converters has a strong
Based on the measured consumption's it cannot be concluded that floor-heating systems are less energy economic than combined radiator heating/floor heating systems.