The objective of this project is to demonstrate that a system for biological cleaning industrial wastewater placed on the seabed is technically, operationally and economically viable to achieve zero
The aim of the project is to participate in IEA Hydrogen TCP, in order to stimulate hydrogen R&D activities in Denmark and to co-ordinate Danish and international scientific work on hydrogen and
SaltPower will partielpate in IEA Hydrogen TCP Task 42 with knowledge about energy efficiency in building new caverns for storage of hydrogen in the future. We will work with ether partners to develop
The overall objective of the eSAF-AAL project is to fast-track the development and demonstration of a very promising technology that converts raw e-methanol (undistilled) to Sustainable Aviation Fuel
The purpose of this project is to implement the next phase in the Exowave strategy, which is to be able to establish a 250 MW wave power plant together with an offshore wind farm before 2030 in Danish
The overall objective of the H2-BOOST project is to improve the efficiency of alkaline electrolyser technologies by min. 10%. By using a novel patent-pending in-situ electrode activation method, it
The purpose of the project is to conduct a field demonstration of a 0.15 MW dynamic electrolyser unit. The demonstration will be used for further scaling DynElectro’s dynamic electrolyser technology
The purpose of this project is to make Crestwing completely ready for its first commercially viable device. With the final demonstration of Crestwing’s 30-meter, 65 tons prototype “Tordenskiold”, the
The goal of the FC-COGEN project is to demonstrate e methanol-based fuel cell system that can generate both heat and electricity for residential and industrial application. The solution will ulti
Hydrogen is envisioned to become a key enabler and energy carrier in the future 100% renewable energy system with predicted applications within transportation, grid stability, industry, re
HT-PEMFC with Danish industry in the lead is on the threshold of market entry and consortium partners are committed to establish a production line of cell components at a production rate of 1
Hydrogen is envisioned to become a key energy carrier in the future 100% renewable energy system with predicted applications within transportation, grid stability, industry, re
The starting point of the project is DTU’s development of a phosphate solid hydrogen ion conducting membrane which is “ionic-protonic-superconducting” in the temperature range 230 – 350 °C
The scope of the project is to recycle high value precious metal catalyst and polymer components from HT-PEMFC MEAs, implement inhouse MEA production using alternative components and test the
The objective of this project is to develop, design, build, test, optimize and commission FPPs first full-scale wave PTO system. The resulting PTO design will be used to build four identical PTO units
The first purpose is to optimize and demonstrate Exowave wave energy concept in a coastal offshore environment, where the produced seawater under high pressure is led ashore and converted to fresh
As international shipping is a significant greenhouse gas emitter - if counted as a country, it would be on a ca. sixth place of energy-related CO2 emissions - the international maritime organization
The Ocean Energy Systems (OES) Task 10, Part II continues the work on verification and validation of numerical models of Wave Energy Converters (WECs) previously supported by EUDPJ.nr. 64017-05197.