The IDE4L project will define, develop and demonstrate the entire system of distribution network automation, IT systems and applications for active network management. The IDE4L-DK Top-Up project is
Power-to-gas (“P2G”) is an innovative and disruptive energy storage solution ideally suited for the Danish energy system. The P2G-BioCat Project is led by a consortium of highly qualified
The aim of the project is to work with Danish housing associations to organise sketch designs and realisation of building integration of PV solutions (BIPV). The total proposed implementation for roof
An increasing amount of power electronic based units in electric power grids give rise to protection and control difficulties during disturbances. A solution is to install synchronous condensers
This project will conduct experimental research in order to identify the potential of a novel energy storage technology. The concerned technology is based on heat accumulation, in the phase transition
The purpose of the project is through applied research and development to demonstrate and develop a building-integratable, transparent PV module harvesting direct sunlight, acting as intelligent
The SmartMEA project aims to develop the next generation high temperature PEM electrodes for improved durability and performance working under SmartGrid conditions. Focus is on electrode optimization
To fulfill the Danish Government's ambitious plan regarding renewable energy, some technical and economical hurdles have to be cleared. A major issue is energy storage. This project will present
An energy payback time less than 1 year for a complete polymer solar cell plant is now reality. DTU, EnergiMidt and Gaia Solar are now taking the next crucial step towards sustainable reliable energy
The project will result in recommendations for integration of heat pumps in existing distribution grid, which otherwise risk to be overloaded. The recommendations will be based on analysis of
In order to efficiently provide system services to the distribution grid, aggregators of flexible DER units require information about the topology of the grid. This information is currently not
Solid oxide fuel cells (SOFCs) are an energy conversion technology that can play a key role during the transition to 100% renewable energy in Denmark. This project aims to enhance the lifetime of
The object of the PROSOFC project is to increase the robustness of the solid oxide fuel cell technology, as this is a key challenge for bringing the technology to the consumers. To achieve this we
The purpose is to develop and validate a full set of industry relevant test procedures for solid oxide cells, addressing performance, durability and degradation. The project will develop test
The Introduction of a new supplemental power generation product based on fuel cells and methanol the current diesel genset will be replaced in telecommunications application in regions with poor or no
The objective of the REST project is to address the current limitations on reliability estimation and testing across several application segments for hydrogen and fuel cell technologies – with focus
A ground breaking new technology for thermal stratification of solar hot water tanks has been invented December 2013. After only a few prototypes the technology offers competitive thermal performance
The project goal is to widen the application of solar cells on facades in urban spaces by refining the architectural expression via innovative building integrated solar cells by using built-in light
The project will analyze the role of distributed energy storages in future energy systems. The goal is a more economical efficient integration of renewable energy. The project secures Danish
The project aims to develop and demonstrate a PV-panel which will both work as a balcony fence and at the same time produce energy to the electricity grid. The PV-panel will be building integrated, be