The objective of this project is to demonstrate that a system for biological cleaning industrial wastewater placed on the seabed is technically, operationally and economically viable to achieve zero
The aim of the project is to participate in IEA Hydrogen TCP, in order to stimulate hydrogen R&D activities in Denmark and to co-ordinate Danish and international scientific work on hydrogen and
SaltPower will partielpate in IEA Hydrogen TCP Task 42 with knowledge about energy efficiency in building new caverns for storage of hydrogen in the future. We will work with ether partners to develop
The overall objective of the eSAF-AAL project is to fast-track the development and demonstration of a very promising technology that converts raw e-methanol (undistilled) to Sustainable Aviation Fuel
The overall objective of the H2-BOOST project is to improve the efficiency of alkaline electrolyser technologies by min. 10%. By using a novel patent-pending in-situ electrode activation method, it
The purpose of the project is to conduct a field demonstration of a 0.15 MW dynamic electrolyser unit. The demonstration will be used for further scaling DynElectro’s dynamic electrolyser technology
The goal of the FC-COGEN project is to demonstrate e methanol-based fuel cell system that can generate both heat and electricity for residential and industrial application. The solution will ulti
Hydrogen is envisioned to become a key enabler and energy carrier in the future 100% renewable energy system with predicted applications within transportation, grid stability, industry, re
HT-PEMFC with Danish industry in the lead is on the threshold of market entry and consortium partners are committed to establish a production line of cell components at a production rate of 1
Hydrogen is envisioned to become a key energy carrier in the future 100% renewable energy system with predicted applications within transportation, grid stability, industry, re
The starting point of the project is DTU’s development of a phosphate solid hydrogen ion conducting membrane which is “ionic-protonic-superconducting” in the temperature range 230 – 350 °C
The scope of the project is to recycle high value precious metal catalyst and polymer components from HT-PEMFC MEAs, implement inhouse MEA production using alternative components and test the
Goal: To demonstrate the performance of a fuel cell bus in Copenhagen. Programme/Plan: When the bus is constructed, it will go into service in Berlin and then Copenhagen.
A 20 Nm2 Hydrogen storage has been specified to be used in a Ford Focus equipped with an internal combustion engine. The storage is constructed from commercial available metal hydrides.
The objectives of the project were to develop and manufacture a lightweight storage for hydrogen usable for pressures up to 300 bar and based on fibre reinforced tanks. Three storages have been
The objectives of the project have been to design and construct a PEM fuel cell driven car, which can be used for demonstration of hydrogen as a fuel in the transport sector. The project has been
The project is divided into two parts, i.e. a general review part and a project specific part. General: 1) General review of safety aspects related to hydrogen driven vehicles and related stationary
A method has been established for production of the anode supported thin-electrolyte cell. The anode supportis 200mum thick and made of NiO and TZ3Y by tapecasting. The electrochemically active anode
The main purpose of the present project has been to test a new type of MCFC unit developed in previous phases of the project. Various parts of the plant e.g. MCFC stack, reformer, catalytic burner