The purpose of the project was to create 3 architectural well functioning PV retrofit low-cost solutions. This was done in collaboration with well-known and estimated architect firms and Danish
With LED based light sources great energy savings and environmental advantages are expected as power consumption, maintenance and use of material are significantly reduced.
The object of the project is to develop a new treatment process for nitrogen removal, primarily to be used in wastewater treatment in the industry. The deammonification process offers a substational
Objectives: Through development and demonstration of an innovative concept for the use of photo voltaic, the objectives are: 1) To advance the use of photovoltaic techniques in Denmark. 2) To advance
The aim of the project was in an international cooperation to develop new/advanced heat storage types suitable as long term heat storages for solar heating systems. The project is the Danish part of
Measurements were made in five swimming baths, and energy savings were achieved using new filters, pumps, water treatment control depending on bather load, etc. In a 50 metre pool, electricity
The project, 'Transparent PV modules - shading devices of the future' is based on the vision of a shading device which is energy producing, sun shading and transparent. This solar cell can be achieved
Organic solar cells hold promise as a sustainable energy source and for energy cost reduction. They represent a cost-efficient alternative to silicon-based cells. However, current technologies still
The project constituted the third and final phase of a project programme that analysed demandcontrolled ventilation in blocks of flats. Project measurements in selected test flats where the influx of
The primary scope of the project was: 1) Establishment of a Demand Respons system, where minor electric customers can be cut off when the price on Nord Pool spot marked is high. 2) Establishment of