SOLBY2006 Solar energy in the energy frame – phase 2. The purpose of phase 2 was to implement a number of development and demonstration projects of solar thermal and photovoltaics for low energy
The aim of the project is to identify, develop and describe existing and new concepts on the supply and installation side and demonstrate that renovations can live up to demands regarding energy
Based on the development projects under the Photovoltaics & Architecture main project, a catalogue has been published of current photovoltaic integration in Danish buildings.
The project investigated the conditions of applying district heating-driven adsorption heating pumps with underground storage for cooling and heating. The concept is most suitable for buildings with a
Air tightness must be brought into focus at an early stage in the planning process, and during the construction phase air tightness measurements should be performed, e.g. on facade sections or in
This project evaluated the performance of the ventilation systems in eight childcare centres, four of which have a natural ventilation system and four others a mechanical ventilation system. The
A calculation tool was developed for use of solar energy in renovation and new construction projects - BYG-SOL – for professional clients, local authorities, architects and consultants. The tool may
The focus on the Danish part of the IEA project SHC Task 32 Advanced Storage Concepts for Solar and Low Energy Buildings was on Subtask C: Storage Concepts Based on Phase Change Materials and on
The overall goal with the participation in IEA PVPS is to maintain and build upon the knowledge transfer to Denmark via the participation in the IEA PVPS work. By the participation a network is
The purpose of the project has been to examine the possibilities for PV in an industrialised building process. The project is an information gathering and development project with basis in knowledge
Together with the sector suppliers, the project developed a complete testing basis for assessment of the energy properties of ventilation devices on the basis of recognised Danish and foreign
Based on experience with ESCO projects in a number of local authority areas, NRGi Rådgivning developed and evaluated a phase-divided model for an ESCO partnership aiming to make it easier for the
In 1,452 households with remote-read meters in the Syd Energi supply area, customers received regular feedback on their electricity consumption via SMS or e-mail in a pilot project. The subsequent
The project idea is to use prefabricated thermo-active structures as concrete slabs with embedded plastic pipes (PEX). The active concrete slabs are used both as cooling and heating system, peak load
This project has included a PhD course at Aalborg University (AAU) and the Technical University of Denmark (DTU)/University of Southern Denamrk (SDU) and it has developed two types of converter which
The project proved that PowerShade with an efficiency ratio in excess of 5% can be produced, and that future development will probably further increase its efficiency. The project also showed that the