The object was to contribute to an international development of methods for a joint evaluation and optimization of the thermal and solar properties of windows. The project was a basis for Danish
This Ph.D. project presents a thorough analysis of the so called SICAM - SIngle Converter stage AMplifier approach to building direct energy conversion audio power amplifiers.
The project established a basis of calculation and a practical basis for optimum choice of solar shading and integrated control strategies for both new building and renovation of office, commercial
Early 1997, the Executive Committee of IEA SH and CP approved a 2 year extension of Task 20 'Solar Energy in Building Renovation'. The aim of this extension was to develop strategies for an effective
The object of the knowledge dissemination programme is to contribute to a continuous, efficient and target group-oriented dissemination of the research results of the research programme for the Use of
Forskningscenter for Elektroteknisk Energiomformning E/F (CETEC)
EFP
1997
1997
The aim of the project is to investigate the different possibillities for developing a compressor used for refrigerators. The goal is an energy efficient compressor
This project is a part of the IEA SH and C Task 23 - Sustainable Solar Buildings. The Optimisation of Solar Energy Use in Larger Buildings. The main objective of the Task is to ensure the most
A measurement system has been built, for Calorimetric Measurement of power in the range 1-50 watt, at test temperatures between 20 and 70 deg. C. This Measurement System is intended to provide a
We wish to establish the technological basis for the reduction of electricity consumption in the case of a wide range of industrial pumps. Pump usage covers a wide range, such as irrigation, heating
The controllable micro-mechanical switch, the micro-switch or the capacitative networks switch (KNK) was invented in 1994/1995 by NRC/MIC. This was based on LK wanting to manufacture electrical
The task are completed with the following results. 1) New glazing systems with a balance between heat loss and solar gains: A new system for montage of glass with overlap connections has been designed