The controllable micro-mechanical switch, the micro-switch or the capacitative networks switch (KNK) was invented in 1994/1995 by NRC/MIC. This was based on LK wanting to manufacture electrical
The task are completed with the following results. 1) New glazing systems with a balance between heat loss and solar gains: A new system for montage of glass with overlap connections has been designed
In ECO-HOUSE 99 in Kolding, Denmark, 59 ecological low energy terrace houses were constructed. The houses are designed as ecological buildings with emphais on total economy based on low operation and
The project has resulted in a number of design proposal demonstrating how new types of glazing can be fitted into multi-storey buildings and how new facade expressions, space and lightning effects can
The purpose is to develop a tool, which can improve the calculation of air and energy flow in large enclosures. Two kinds of tool usually applied in advanced calculation of large enclosures are
The objective of the project is to optimize solar walls considering output, financing, indoor climate and aesthetics. For an optimising to take place, an optimizing of the interaction between solar
The purpose of the project was to develop a catalogue of different solar shading coefficients for solar heat gain and daylight in combination with different glazing types.
The objective of this project is to establish some basic guidelines on the appropriate integration of daylight in the building design. Published as SBI directions, the guidelines will provide the
The aim of this project was to document energy savings and user acceptance for different control strategies for artificial lighting in the Bayer Headquarter, DK, where artificial lighting is
The report contains environmental data sheets for 40 selected building elements of different sizes. An environmental data sheet outlines the contribution of the building element in question to a
Today we have a blurred picture of which products and systems within ventilation people will demand in future. In order to give interested an incentive to do the necessary initiatives a technical
The development of evacuated glazings approaches prototype production. Thus the basis for decision-making for commercial production will be created within approx. a year and a half.
Coordination of all Danish CADDET activities. Mailing of CADDET Newsletters, brochures and similar material. Organization of CADDET register inputs and liasion activities to the CADDET Centre and
The aim of the project was to demonstrate ventilated solar walls in practice, including satisfactory architectural and structural adjustment to a certain building.
The aim of this project was to design and build an apparatus for evacuation and assembly of aerogel glazings up to 60 cm x 60 cm based on the proposed method. The key element of the method is the
The purpose of the project is to produce the technical basis for dimensioning and developing motor/pump systems, so that the total concept is energy-optimized for domestic heating.
Forskningscenter for Elektroteknisk Energiomformning E/F (CETEC)
EFP
1996
1998
One of the results is, that the separation depend not on the gravitational force itself but on the exponent of the square of the peripheral speed of the centrifuge.
The objective of the project was to develop new trawls for the Russian fleet, that would save energy per unit of catch through the application of new designs and modern materials.
The aim is to analyse and evaluate appropriate means of establishing a working interaction between different intelligent components, e.g. for energy management purposes. The interaction between