The aim of the PlateCell project is to develop and demonstrate roll-2-roll electrodeposition of thin film photovoltaics based on the earth-abundant and non-toxic, CZTS, semiconductor with at least 8%
The project will be the Danish part of the recently started IEA (International Energy Agency) SHC (Solar Heating & Cooling Programme) Task 64 on Solar Process Heat. The key components of solar heating
The objective of the PV-Rock-Roof project is to develop a cost-effective, aestetical and energy saving roof-cover where a new type of photovolatic (PV) module is glued to the insulation without need
The objective of the project is to develop a combined hardware and software solution that can efficiently act as a tool for doing fast and accurate drone-based luminescence inspection of solar plants
In the BIPV Quality Cities project the total amount of PV systems with special focus on BIPV Quality, Solar Watch online monitoring and a combined focus electricity savings will amount to 3.850 kWp.
The main purpose of the planned Phase III (PVIB-III) is establishment of 1,5 – 2 MW of additional capacity primarily in terms of a large utility scale PV power plant of at least 1,5 MW. Thus very
This project focuses on the integration of photovoltaics (PVs) with thermoelectric generators (TEGs) and microchannel heat exchangers (µHX) in two parallel phases: low-thickness solar power systems
The aim is to develop a solar-powered comfort cooling system, where electricity produced by solar cells via a heat pump is converted to air conditioning in the existing ventilation system, via
The proposed EUDP project is realized in cooperation with the housing association, 3B, which will be involved in a large roof renovation project in the Måløv Park housing estate.
The purpose of this project is to validate the technical and commercial potential in a new method to manufacture feedstock for silicon solar cells. The method is expected to generate the same product
The future role of solar thermal in urban environments and in smart renewable energy systems is analysed in this project. Based on economic analysis, strategies and technical solutions as well as
The purpose of this Combined Solar Thermal Demonstration is to commercialize the CSP system, and verify the respective efficiencies of CSP and Flatpanel technology at a variety of temperatures, the
The project aims to develop a PVT module that combines insulation, solar cell and solar panel in integrated building components intended for the renovation of apartment buildings. The building
The aim of the project is to develop very large self-sustainable PV/PVT modules with associated flashings which can replace existing roofing on larger buildings such as sheds, warehouses, etc
”The New Roof” is a holistic new approach to obtain the multifunctional and energy harvesting roof for renovation and new build. It is developed in an integrated design process aiming at a market