The purpose is to examine methods for optimising the biogas yield of waste activated sludge. Furthemore it is the purpose of the project to evaluate the effect on sludge dewatering properties as well
The purpose of this project is to examine the effect of a flash treatment of biological excess sludge upstream of anaerobic digestion. The flash treatment is carried out in a pilot plant at Holbæk
The aim of the project was to evaluate the impact from wet oxidation and steam explosion on the fermentation of hydrolysates from lignocellulosic biomasses.
Anaerobic treatment of Pulp Mill Wastewater: Anaerobic treatment is a mean of reducing the biological oxygen demand (BOD) for several types of effluent from the pulp and paper industry.
The present project consists of introductory investigations of co-digestion of the organic fraction of municipal solid waste (OFMSW) together with manure. The investigations included characterization
The purpose of the schedule-project is primarily to delimit and qualify the application for the main project and thus contribute to make a more accurate pricture of the perspectives by carrying out a
This project analyses the individual taxes as well as the combination of all these taxes and duties related to environmental concerns, including taxes on heating, transport fuels, electricity, water
Projections of future greenhouse gas (GHG) emissions shows that non-annex l countries within few years will account for more than half of total global emissions. GHG reduction targets will involve the
The purpose of the project is to define the design basis for vacuum drying of sludge. Work Programme: The project comprises initial tests, modification of a pilot plant and establishment of the design
Mechanical dewatering, possibly at high rates and to high dry matter content has been shown to be advantageous in terms of energy efficiency, environmental protection and economy. This is irrespective
The project included the following milestones: 1) Wind tunnel measurements on a NACA 63-415 airfoil with a modified leading edge. 2) Detailed verification of 3D Computational Fluids Dynamics (CFD)
The project will contribute to the basis for connecting large wind farms to power transmission grids regarding voltage quality and power system stability.
KORA, Det Nationale Institut for Kommuners og Regioners Analyse og Forskning
EFP
1999
2000
In the project a number of empirical analyses have been carried out in order to quantify the effect of different policy instruments (energy taxes, subsidies to investment in energy efficiency and
KORA, Det Nationale Institut for Kommuners og Regioners Analyse og Forskning
EFP
1999
2003
The main objective of the project is to construct and analyse a large data set with information about energy consumption of individual households. The data set is constructed by merging administrative
The aim of the project has primarily been to: 1) identify the barriers preventing the implementation of energy saving measures, 2) bring up recommendations and test different means in connection with
This project is a continuation of previous work conducted by TK Energi, with the objective of optimising small scale gas fuelled engine generator sets, especially concerning efficiency, emissions and
The project is a Feasibility Phase (A) of a new project aiming towards design, construction, testing and demonstration of a multipurpose instrumentation (FSB-pig) for internal inspection of offshore
It has been demonstrated that flow in large district heating pipes can be measured using LDV. The results of the project indicate strongly that the method is relevant for future check or control of