The design with world record low loss of 0.6 W/m at 2 kArms was transfered to a 30 m long cable. These conductors are bendable, and the manufacturing capacity in the experimental plant was extended to
The overall goal of this project has been to provide the knowledge and the understanding that can lead to an increased efficiency for ac/dc power systems complying with EN61000-3-2 in wide input range
The general objective of this research project is to research children's roles and possibilities for taking action in the energy area. The project deals With energy related education (EE) - focusing
The aim of the project was to optimize the biogas process of high ratios of the organic fraction of municipal solid waste (OFMSW) in co-digestion with manure. Optimization was aimed with regard to
The project report describes the design and construction of a 1-1.5KW high efficiency Grid connected Building integrated Photovoltaic Power Generator for use in Houses or larger Photovoltaic Plants
Microbiologically induced corrosion (MIC) in district heating systems is a well-known phenomenon, which to a large extend has been associated with sulphate-reduging bacteria (SRB). Detection of these
The aims of the project was enhancing and further developing a model system capable of analysing and predicting the wind and the potential wind energy in Denmark.
The overall objective of the development plan is to construct instrumentation for internal on-line inspection of offshore gas pipelines for Burial, Free Spanning and loss of concrete weight coating.
By using sludge from local sewage treatment plants as additive in the production of lightweight clinkers, the energy content in the sludge is utilised and the mineral part is a substitution to natural
The goal of the project is to collect, promote, and communicate the knowledge of pyrolysis and related thermal conversion processes for production of fuels and chemicals from biomass.
The overall objective with the project has been to develop and verify a model for assessment of the interaction between a wind farm and the power systern.
Within the project, the most promising design of PV/T components have been identified: 1) A water-heating collector with the PV cells acting as absorber in a direct thermal contact with water piping
The aim of this preliminary project has been to develop a 'self-learning' district heating meter using a neural network to control consumer heating installations. Two different neural network
The activities were: Development of improved components, analysis of durability, contacting, improving the methods, materials development, studies of mechanisms and of defect and structural chemistry
The objectives of this research project are to reduce energy consumption of electrostatic precipitators and to improve precipitation efficiency, particularly for small dust particles.
Use of Drag Reducing Additives, DRA, in circulating district heating water can reduce network pressure losses significantly. However, a serious obstacle to the practical implementation of this concept
The aim leading to the LT-CFB concept is to create better access for the efficient, clean and economic utilization of bio-fuels and waste products having a high content of slag forming and/or