The aim of the project is to provide the best possible technological solution for the production of garden park chips with acceptable technical specifications and at the same time pave the way for a
The aim of the project is to develop an energy-efficient biomass boiler for straw combustion. The boiler must have a high efficiency and low NOx emissions. The goal is to reduce NOx emissions without
The objective of BIO-ReFuel is to design, produce and test a small biogas to methanol modular
demonstration plant that can produce 426 liters of methanol from approx. 240 m3 of biogas per
day.
The BE-Clean project will demonstrate a new cleaning process. The process will remove unwanted
sulfur from biogas. The new process is cheaper than currently available technologies and uses
electricity
During production of biogas different malodorous compounds are formed, e.g. hydrogen sulfide (H2S) that, without proper waste air treatment, can be a major nuisance towards neighbors to the biogas
The objective of the project is to develop a special wheeled mixer vessel designed for pretreatment of straw and deep litter before utilization in an agricultural biogas plant.
The objective of the project is further development and documentation of the online measurement system into an operational tool for real time monitoring and optimization of the biogas process in
The purpose of the project is to; develop, build and test a filter system that can process product gas from a gasification process so that this gas is prepared for subsequent use. In addition to this
The purpose of the Straw2Gas project in full is to demonstrate the use of straw fibres from the JENA straw treatment plant for the production of biogas, and thereby open for a commercial and technical
The project will examine how concrete technology can be applied to large offshore wave energy devices in this case Wave Dragon and KNSwing. The study will examine solutions such as ordinary reinforced
BioUpgrade is aiming at developing an innovative, efficient and robust technology for biological biogas upgrade, utilising the indigenous hydrogenotrophic cultures of the anaerobic digestion process
The long-term goals of OES Task 10 are:
1. To assess the accuracy and establish confidence in the use of numerical WEC models
2. To determine a range of validity of existing computational modelling
The long-term goals of OES are:
1. To assess and establish confidence in the use of Wave Energy Converters
2. To engage and integrate Danish industry in international initiatives
3. To identify