We will optimize stalk as a biomass. By pregrinding the stalk, we can reduce the residence time in the biogas reactor. The particle size of 05-15 mm. will be much easier to organically convert, and we
The project objective is to test, verify and document the radar control installation aiming at defining the minimum requirements for this type of system capability. The project will also investigate
The objective of the project is on basis of participation in the IEA Task 29 MeXNext III to utilize the results from a new wind tunnel measurement campaign on a 4.5m rotor (summer 2014) for validation
Seagar aims to develop and demonstrate a device that enables bolts in wind turbine towers to be tightened automatically. The robot moves from bolt to bolt, tightens each bolt and documents all
Goals:
Improve knowledge of the market potential for Small Wind. Identify industrial business plans for
manufacturing and marketing. Improve knowledge of export by means of practical training and
issu
Blade replacement in wind turbines is costly due to the large cranes needed. The Single Blade Exchange without crane system will be able to do the replacement of blades without a mobile crane and with
LM WIND POWER A/S
Innovationsfonden
2015
2018
The project OPTI_MADE_BLADE has as its goal to develop and commercialize a new concept for procuction of large (>70m) wings for offshore windmills.
Innovationsfonden
2014
2018
The project INNOMILL works towards development of a more profitable and ultra flexible high precision system for fabrication of big elements in the wind mill industry. The goal is to reduce the cost
The project seeks to develop the key to commercial bio refineries that through compression and plug-flow treatment of biomass can facilitate cost and energy effecient storage, transportation, and pre
The purpose ofthe project is to conduct a feasibility study on how biogas can recover energy and nutrients from urban waste in a sustainable way (economically, environmentally and politically). The
To be able to install wind turbines and for these to operate in Denmark or in Danish waters, they must be certified and serviced in accordance with the technical certification scheme for wind turbines
This project includes completion of project 2008-1-0164 "Selective Hydrolysis of Sludge, phase 2".The mentioned project showed profound effect of Selective Hydrolysis on digestion and biogas
The main objective of this project is to advance the overall accuracy of the existing aero-hydroservo-
elastic computer codes related to offshore wind turbines and their substructures. This is
achieve
The project has generally the aim to support Denmark's participation in the "IEA Wind Energy R & D Implementing Agreement" in 2015 through participation in the Agreement Steering Committee ("Executive
AMMONOX focuses on developing a sustainable and economically attractive, ammonia-based process for a) enhancing the productivity of biogas plants based on manure, b) minimizing NOx emissions from gas
Loss of methane from biogas plants has detrimental environmental effects and reduces the efficiency and economic output of the biogas production. The aim of this project is to reduce the methane loss
This project proposes a bioenergy concept in which cast seaweed collected from beaches will be used as substrate in co-digestion with manure and other wastes in biogas plants for energy production
The vision of the present project is an online Predictive Corrosion Monitoring System (PCMS) that through measurements of few, significant flue gas components can predict and hence optimise the
This project identifies the economic and technical potential and barriers for increased power production and reduced loss of heat on district heat production by means of reduced temperatures and local