The aim of the project is to make a final energy optimization of an air staged downdraft gasification plant by measures that reduce the output of charcoal and the consequently energy loss from the
The aim of the project is to ensure a technical and economical strong commencement of the operation of a complete entire CHP biomass gasification plant. The additional feed in tariff from the ForskVE
Denmark has a large untapped potential in biogas. Biogas is a cheap renewable energy source that helps to bring down CO2 emissions and increases Denmark’s independence in energy supply. Biogas
In this project, validated thermal models will be developed and used for a proposed condition monitoring method of wind turbine generators, using thermal imaging. The live thermal data will be
The purpose of the project is to analyse high efficiency bio-SNG production technologies, potential available biomass and different aspects of the interaction between the bio-SNG gases and the natural
The purpose of the project is improve the efficiency of Power Take off systems for Wave Energy Converters, by analysing and optimizing a new PTO-system with multiple pressure lines. This includes
Development/demonstration of economically viable small CHP plants based on gasification and steam raising through burning of the clean gas in once through steam boilers at high steam temperatures and
The purpose of the project is to investigate the feasibility of electrochemical upgrading of biogas to pipeline quality in Denmark by means of Solid Oxide Electrolyser Cells (SOEC). Computer modelling
HI-CON A/S
ForskEL
2011
2011
As an initial step for FLOAT – a project on using UHPC for wave energy floaters - a study has been undertaken to investigate preliminary design of 2 types of floaters, essential properties of UHPFRC
The focus of this effort is the reduction of uncertainties in offshore wind turbine design, by complete measurement of the effects of interactions of a modern turbine structure (located on the Walney
The objective of the project was to improve the use of animal manure for biogas production by a thermo-alcalic hydrolytic pre-treatment. Substantial gas yield improvements have been documented for all
This project will demonstrate erection and operation of an entire biomass gasification plant for CHP production in the commercial size of 1,300 kWth. In the project a complete commercial size forest
The objective of the Light Rotor project is to develop the basis for design of wind turbine blades for use on the order of 10MW rotors with lower weight, tailored aeroelastic response and optimized
The purpose is to develop and validate computer codes related to response simulation on offshore wind turbines and their substructures. It is carried out within the framework of lEA Annex 30
The aim of this project is to develop a wood stove with high energy efficiency and low emissions of pollutants and CO2. We will develop a generic control system for wood stoves and an optimized
Megavind continues to support and consolidate the stronghold of the Danish wind industry through a focused and strategic vector apporach to validation, demonstration, research and education. Megavid
Solum Gruppen has built two versions of an organic waste conversion plant - AIKAN - able to double the energy output of organic waste compared to the current solution, incineration.
The project resulted in the development, design, engineering, construction, and demonstration of a plant for industrial scale use of cereal straw for anaerobic digestion and production of biogas. The