The object of the project was to develop an experimental method for estimating the modal properties of wind turbines during operation. OMA (Operational Modal Analysis) proved suitable for
The objective was to assess the potential of addition of sulphur with a view to emission control in connection with natural gas-firing in swirl-stabilised diffusion burner and in engines and, if
The objective of the overall project was to develop a system for online optimisation of waste incineration. Phase 2 worked to design a measuring programme at Haderslev CHP plant to determine the key
This project is one of several projects with the common purpose of predicting electricity generation from a wind farm for up to 48-60 hours based on meteorological forecasts.
The PSO Project 5820 aimed to study deposit-induced Cl corrosion under well-controlled laboratory conditions, simulating the conditions in biomass-fired boilers. This was done by exposing pieces of
The aim of this project is to implement an online volatile fatty acids (VFA) sensor developed at E and R DTU for monitoring, control and optimization of the biogas process.
The annex will give the participants an overview of the technical and environmental assessment challenges encountered in offshore applications and help them to understand the areas of further R and D
The aim of the project is to utilize Denmark's position and to develop international collaborations in order to optimize four major steps in the Danish Bioethanol concept.
The gasproduction from liquid manure in terms of volume is low and the economy of the plants are often very dependent on the supply of easy degradable waste products and at the moment the extension of
The main objective of the project was to improve biogas production from manures. This objective was addressed by investigating: 1) the effect of different reactor configurations, 2) operational
The purpose of the project is to clarify advantages and disadvantages, potentials and possible problems when burning or gasifying the separated fibre fraction from biogas production, before the fibre
The project included the second phase of a process aimed at establishing a platform for wind turbine simulation as a prerequisite for advanced electrical design and optimisation.
1) Analyse the country-level, regional and global potential of bioenergy, forestation, and other biomass-based mitigation strategies, including implications for the atmospheric CO2 concentration and
Objective: To synthesise and transfer to stakeholders important international knowledge and new technical information concerning conventional forestry systems for sustainable production of bioenergy.
The aim of this project is to promote research results within bioenergy to researchers, advisers, factories and public authorities among others. The promotion is to be done through a newsletter, six
The aim of the project is to develop, verify and implement a detailed physical model for the wind field in a wind farm. The model will allow for detailed aeroelastic simulation of wind turbines sited
The overall objective of the project is to ensure the development of an aetoelastic design complex, which can create the basis for the nest generation of wind turbines and make new design trends
Fødevareøkonomisk Institut. Jordbrugets Driftsøkonomi - KU
EFP
2004
2006
The main objective of the project was the identification and analysis of new technical concepts for centralized biogas plants, which would make them less dependant on organic waste supplies, and this
The political and technical objective of the project is to ensure an efficient outcome of the Danish participation in the international work group IEA Bioenergy Agreement, Thermal Gasification of