The goal of the project is to develop, test, validate and evaluate a novel control architechture for optimised operation and seamless integration of micro CHP based on a generic virtual plant (VPP)
Use of cellulose for biofuel production requires the cellulose to be degraded into small molecules. Several different enzymes can be used for this prupose. The project aims to develop a method for
The purpose of this project has been to make preparation for organisational, legal and technical nature with regard to a coming upgrading of BioWynergi Process ApS 450 kWh Open Core stage-phased
DANISH FLUID BED TECHNOLOGY ApS
ForskEL
2007
2012
The overall goals of the project have been to contribute to the continued development of the LT-CFB gasifier, facilitate a small full scale demonstration plant and otherwise improving the basis for
The project united a wide circle of scientists, experts and industrial partners with varying competences and specific experience to hear their visions for how Denmark should develop new long-term
Ørsted A/S
ForskEL
2007
2012
National and international research gas not only revealed that the conversion of biomass particles in suspension-fired boilers differs from the conversion of pulverised coal - it has also, through
The long-term vision of the project was to develop a system for online optimisation of waste incineration. The idea is to base the system on advanced measuring technique, dynamic process models and
In situ simultaneous measurements of gas temperature and gas composition are of great interest in combustion research. An optically based technique can be performed in situ for various extremely hard
The purpose of this project is to investigate oxyfuel combustion of biomass and biomass-coal mixtures in semi-technical scale and supplemented by laboratory experiments and process simulations to
The project involves the final process design of a full-scale plant for continuous prodiction of second-generation bioethanol based on results from the IBUS pilot plant, where straw is the basic
The project aims to enhance current knowledge of how temperature and pressure during the production process and the water content of biomass affect pellet quality, and of the mechanical properties of
Through contacts to key players in the biofuels market, various means and policies are considered to identify the most apporpriate package solutions. The results will be used by the European
IEA task 42 identifies existing biorefineries and process potential, prepares common definitions and standards for classifying and assessing technical, financial and environmental advantages and
Methods are devised for online control of biofuel pellet quality using, for instance, mechanical durability, fine particles, pellet density and length and particle size as parameters. The new methods
The project enables Denmark to resume its activities in the IEA implementing agreement on hybrid and electric vehicle (IA-HEV), dealing with, for instance, electric cars with batteries and fuel cells
These two projects continue the publication of the eight-page news magazine Bioenergy Research with six issues a year. The magazine goes over new research results and features debate-triggering and
One of the current topics of the IEA’s cooperation on research in fuel wood chips is forecasts of fuel resources, technical production, wood fuel transport, valuation, long-term storage of decomposed