The overall objective of the project is to explore the potentials of a completely new wind turbine
concept – the Low-Wind turbine, designed for optimal integration in a power system with
considerable
The MADEBLADES project targets further development and prototype demonstration of a disruptive design and manufacturing solution for large (>90m) offshore wind turbine blades.
The purpose is to develop a new methodology for the assessment of the remaining useful life of wind turbine rotor blades individually, based on their individual damage states. The methodology is
The scope of this project is to develop a crane that can install a complete turbine with a hub height of 250m. The turbine can be installed in less than 2 days and the weight of the crane is less than
The obejctive of ProbWind is to develop and demonstrate the basis for reliability-based/probabilistic design of wind turbines, leading to the development of a new international standard on
The objective of the LICOREIM project is to demonstrate lidar-assisted wind turbine control strategies for robust and reliable improvements on both currently operating (i.e. retro-fit solutions) and
The purpose of this project is to test/demonstrate the proof of concept of the developed lifetime extension concept for offshore wind turbines. It is expected that by using the developed concept it
The project aims at increasing the efficiency of new and operating wind tubines by developing innovative vortex generators, i.e., small devices attached to the surface of blades, improving their
This project focuses on providing solid proof that a) 3D printing can be used to manufacture tall wind turbine towers, b) it can be done economically and technically feasible, c) 2 design concepts for
The technologies in scope aim at increasing the aerodynamic efficiency of wind turbines, reducing turbine load levels, and increasing the authority of control of wind turbines through additional
The business idea of the blade painting machine is to make the blade production cheaper, safer and more flexible. The SEM-BC will be designed to work with all blade types and is relevant for more than
In the work concerning experimental verification of thick airfoils, the focus has been on airfoils used by the industry. The method has been verified with measurements on a NACA 63-215 airfoil
The project objective is to develop more generally applicable assessment and design criteria for isolated power supply systems, and the expected result is a guideline for design of such systems.
The purpose of the project was to investigate how the rotor design of an existing wind turbine can be extrapolated to a 4 MW turbine. Within the project two optimization codes for optimizing a large
Transfer of technology and industrial cooperation require a common framework, thus a compilation and analysis of Russian wind load and other external conditions in relation to European wind turbine
The project constitutes a continously running 5 years research programme on aeroelasticity with the objectives to improve the basis for design and optimization of wind turbines, and establish an
The purpose of the project is to develop and test micrometeorological tools for the prediction and estimation of properties of the wind that are important for loads on wind turbines situated on land
The purpose of the project is to perform an experimental investigation of extreme load on wind turbines, measuring both the wind field and the structural load response on high wind speed sites.